Troubleshooting
If there is no picture or the TV does not operate normally, make sure the problem isnOt due to
the reasons indicated below.
If the problem persists even after taking the measures indicated, please contact a service
technician.
Cannot turn the TV onPoor picture
Y Press the Main power button on the TV.Y Press the COLOUR SYSTEM button to select an-
other colour system. (see page 8.)
Y Connect the power cord to the AC outlet.
Y Adjust the picture settings. (see page 17.)
Y Is a component signal output device, such as a
The screen turns blueDVD player, connected correctly? (see page 5.)
Y Is the BLUE BACK function on? (see page 13.)Y Is the VIDEO-2 SET function setting correct? (see
page 14.)
Remote control inoperableY If noise (snow) totally blocks out the picture,
check the following.
Y Replace the batteries. (see page 3.)- Have the TV and aerial been connected properly?
- Has the aerial cable been damaged?
Buttons on front of the TV do not work- Is the aerial pointing in the right direction?
- Is the aerial itself faulty?
Y Switch the CHILD LOCK function off. (see pageY If the TV or aerial suffer interference from other
13.)equipment, stripes or noise may appear in the
picture. Move any equipment which can cause
interference away from the TV.
TV does not respond immediately
Y Press the main power button on the TV to turnY If the TV or aerial suffer interference from
off the main power. Press the main power buttonsignals reflecting from mountains or buildings,
again to turn on the TV. If the TV returns to adouble-pictures (ghosting) will occur. Change
normal state, operation is normal.the aerialOs direction or replace it with an aerial
with better directionality.
Y When a white and bright still image (such as a
The TV turns off suddenlywhite dress) is displayed on the screen, the
white part may look as if it is coloured. When
Y Is the OFF TIMER function set to operate? (seethe image disappears from the screen, the
page 9.)unnatural colours will also disappear.
Y Is the AUTO SHUTOFF function on? (see page
13.)The picture is tilted
< AV-29W83 only >
Poor soundY A picture may be tilted due to the influence of
Y Adjust the sound settings. (see page 17.)the earthOs magnetism. In this case, use the PIC-
TURE TILT function to adjust the tilt. (see page
12.)
21
LCT1179-001A-H2102.7.29, 6:43 PM |
ACEC
