WFT1EK_E2.fm Page 18 Wednesday, January 17, 2001 9:30 AM
3LFWXUH3LFWXUH3LFWXUH3LFWXUH####IHDWXUHVIHDWXUHVIHDWXUHVIHDWXUHV
2Press the i buttons to choose the
appropriate colour system.
PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43
NTSC 4.43 MHz system
AUTO:
To display the PICTURE FEATURES menu:
This function detects a colour system from the input
1Press the 3 button to display MENU (mainsignal. You can only use this when you are viewing a
picture from programme number PR 0 (AV), or on EXT
menu)
terminal.
2Press the ë buttons to choose PICTURE
3Press the button to complete the
FEATURES, and press the 3 button3
setting
nnnn$872$872$872$872####915915915915The menu disappears.
VNR Stands for ?video noise reduction?.? The AUTO function may not work properly if you
The AUTO VNR function reduces any ?noise? (interference haorve poor signal quality. If the picture is abnormal in
snowing) in the current picture. The function also adjusts the AUTO functiothen, choose another colour system
optimum sharpness of the picture (SHARP). manually.
? You cannot choose NTSC 3.58 or NTSC 4.43 for
1Press the ë buttons to choose AUTOprogramme numbers PR 0 (AV) to PR 99.
VNR
nnnn7=6#7=6#7=6#7=6#$872$872$872$872####$63(&7$63(&7$63(&7$63(&7
2Press the i buttons to choose AUTO
This function only works when the ZOOM mode is set to
MIN:
AUTO(WSS) mode. It sets the ZOOM mode you want to use
The AUTO VNR function is cancelled. If you set the
for when a WSS signal is not included in the broadcast signal
mode to AUTO but feel that the sharpness of the originalor the signal from an external device. You can choose one of
picture has not been reproduced fully, change the mode
three ZOOM modes.
to MIN. However, any noise remaining in the original
picture may be emphasized.
? For details of the AUTO(WSS) mode, see the ?AUTO
(WSS)? section within ?3 ZOOM button? on page 11.
MAX:
This mode always reduces any noise as much as
1Press the ë buttons to choose 4:3 AUTO
possible, irrespective of state of the picture. When you
set the mode to AUTO but still notice some noASPECT. Then press the ise,3 button
change the mode to MAX. However, this may reduce the
The sub-menu of the 4:3 AUTO ASPECT function
sharpness of the picture.
appears.
3Press the 3 button to complete the
setting.
The menu disappears.
nnnn&2/285&2/285&2/285&2/285####6<67(06<67(06<67(06<67(0
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
2Press the ë buttons to choose a ZOOM
system manually.
mode
1Press the ë buttons to choose COLOUR
SYSTEM. Then press the 3 button3Press the 3 button to complete the
setting
The sub-menu of the COLOUR SYSTEM function
appears.
The menu disappears.
4; |
ACEC
