AV-32/28R57SK / LCT1793-001A-U / ENGLISH
AV-32&28R57SK_Eng.book Page 25 Wednesday, March 30, 2005 2:58 PM
PICTURE menu
? COLOUR SYSTEM
FEATURESThe colour system is chosen automatically.
However, if the picture is not clear or no
Choose FEATURES and press the a or 3 colour appears, choose the colour system
button to display the sub-menu.manually.
FEATURES
1 Choose COLOUR SYSTEM. Then
COLOUR SYSTEMpress the a or 3 buttonAUTO VNRMIN
The sub-menu of the COLOUR SYSTEM 4:3 AUTO ASPECT
function appears.TVOK
D1015-EN
COLOUR SYSTEM
? AUTO VNRPAL
VNR Stands for ?video noise reduction?.
TVOK
AUTO:
This mode reduces any ?noise? (interference D0016-EN
or snowing) in the current picture. The
function also adjusts the optimum sharpness 2 Press the 5 buttons to choose
of the picture (SHARP).the appropriate colour system.
Then press the a button
OFF:PAL:
The AUTO VNR function is cancelled. If PAL system
you set the mode to AUTO but feel that the NTSC 3.58:
sharpness of the original picture has not been
reproduced fully, change the mode to OFF. NTSC 3.58 MHz system
However, any noise remaining in the original NTSC 4.43:
picture may be emphasized.NTSC 4.43 MHz system
AUTO:
MIN:This function detects a colour system
This mode reduces any noise irrespective of from the input signal. You can only use
the state of the picture. If you set the mode to this when you are viewing a picture from
AUTO but feel that the sharpness of the programme number PR 0 (AV), or an
original picture has not been reproduced,
change the mode MIN. However, any noise EXT terminal.
remaining in the original picture may be ? The AUTO function may not work
emphasized a little. And this may reduce the properly if you have poor signal quality.
sharpness of the picture a little.If the picture is abnormal in the AUTO
function, choose another colour system
MAX:manually.
This mode always reduces any noise as much ? When in the Programme numbers PR 0
as possible, irrespective of the state of the (AV) to PR 99, you cannot choose NTSC
picture. When you set the mode to AUTO but 3.58 or NTSC 4.43.
still notice some noise, change the mode to
MAX. However, this may reduce the
sharpness of the picture.
25 |
ACEC
