5. After the channel is received successfully, you then need to manually add this channel to the
CHANNEL SUMMARY of the MENU. After this, the channel can be selected by up/down keys.
6. Be aware of the following:
z The best direction of the antenna varies according to the broadcasting stations. You can
retrieve some important information such as your regional broadcasting stations,
broadcasting channels, and the best direction of the antenna by inputting your address or Zip
code at the following HP. http://titantvretailzone.com/rz/RetailZone/main.asp.
z Basically, your requested channel can be received if there is a strong enough signal level to
receive it. However, sometimes you might not be able to receive a channel depending on the
receiving environments or surroundings (Ghost or other adjoin channel).
z Sometimes, a major channel number is changed in some broadcasting stations. In this case,
you can receive the channel by direct channel selection but the old channel number will
remain in the EPG screen. To erase the channels, you need to execute the AUTO TUNER
SETUP again. At this time, you need to execute the AUTO TUNER SETUP only on Digital
channels by setting the ANALOG TUNER to SKIP.
Channel Number Display
Regarding ATSC broadcasting channels, the RF channels that are now broadcast and the
channels that are displayed on screen are sometimes different from each other. With this TV,
channels that are received once and stored in the CHANNEL SUMMARY will be used as the
database, and the information will be memorized. After this, every channel number can be
selected, but the channel indications that broadcasting stations express will take priority.
The Channel up/down on the remote control will only scan RF channels. Sub channels will be
skipped. Up/down of Sub channels will scan all ATSC channels.
Also, if you turn the power off while receiving Sub channels, or if you execute CH Return, channel
receiving will start from the main channel of the channel.
In this TV, on the screen display (D##) means RF channels. (## is the channel number which you
select.)
ML (Multilanguage)
There is ?Multilanguage? in ATSC broadcasting. If there is an indication of Multilanguage in
broadcast mode, press the ML button and ?NEXT? will be displayed on screen, and the other
audio program can be selected. If ML button is pressed for a channel with no Multilanguage
indication, ?NEXT? will still appear.
2 |
ACEC
