Adjusting the White Balance
Adjusting the White Balance Automatically
This unit is adjusted to display the natural colour. However, the white balance can be re-adjusted with the following steps.
1.Place a piece of white paper on the
stage
2.Adjusting zoom
Adjust till the full screen becomes white.
White paper
3.Adjusting brightness
4.Press the [WHITE BALANCE AUTO]
button
The white balance will be re-adjusted in about 5 seconds.
I The button indicator lamp will blink initially, and goes off once[WHITE BALANCE
the white balance adjustment has been completed.AUTO] button
Adjusting the White Balance Manually
Depending on the object, if the images appear reddish, bluish or the overall colour tone appears to be bad even after the
automatic white balance adjustment has been performed, adjust the colour balance manually.
RED
Increase the red
component
Decrease the red
component
BLUE
Increase the blue
component
Decrease the blue
component
USERSETUP
DEFAULTUSERSAVE
WHITE BALANCE
AUTOREDBLUE
PICTURE MEMORY
CAMERA123
NEGA POSI BW COLOURTEXTMICROSCOPE
E-18 |