MX-KC45(J)_EN.book Page 22 Wednesday, January 11, 2006 3:21 PM
Using the Timers
When selecting TAPE:
To cancel the Daily Timer temporarily:
Insert a cassette tape you want to play into Deck A.
When selecting AUX:1Press the CLOCK/TIMER button on the Unit
Prepare the external equipment so that it will turn on at the ONrepeatedly until the ?DAILY? appears on the
time set by the System.
To allow this, the equipment should have the timer function.display.
2Press the CANCEL button on the Unit.
5Setting the volume level.
Press the c or 4 button to select the volume level.?OFF? appears and both the Timer indicator ( ) and the
?DAILY? indicator go out.
MIN, 1-30, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.
To activate the cancelled Daily Timer:
1Press the CLOCK/TIMER button on the Unit
repeatedly until the ?DAILY? appears on the
display.
6Press the SET button.The ?DAILY? indicator blinks and the Timer indicator ()
The timer setting is completed and the display returns to thelights up on the dispaly.
display before you set the Timer.
2Press the SET button on the Unit.
7Press the STANDBY/ON button to turn?DAILY SET? appears on the display. The Timer indicator
off the System, if necessary.( ) and the ?DAILY? indicator remain lit, and the display re-
The Timer indicator ( ) and ?DAILY? indicator are lit on theturns to the original display.
display, showing that the Daily Timer is set to on.
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning. If the System is unplugged, or a power failure occurs,
the timer setting will be lost in a few days. You will
When the timer ON-time comes:
need to reset the clock first, then the timer.
The following operation will be automatically repeated every day.
When the timer ON-time comes, the System automatically
turns on. The music source you have set is played. The Timer
indicator () blinks and ?DAILY? indicator lights duringSetting the REC (Recording)
timer operation.Timer
When the timer OFF-time comes, the System automatically
turns off. Then, the Timer indicator () and ?DAILY? indica-With the Recording Timer, you can make a tape of a radio broad-
tor remain lit on the display.
cast automatically whether or not you are home.
Once you have set the REC Timer to record a source, the timer set-
ting is stored in memory. So, though the REC Timer turns off once
it is used, you can recall it at any time.
If the System is already on when the timer ON-time
comes, the Daily Timer does not work.
You can set the REC Timer whether the System is on or
off.
Perform each setting within approx. 30 seconds. Other-
wise, setting will be cleared and the procedure must be
repeated from the beginning.
If you have made a mistake while setting the timer, press
the CANCEL button on the Unit. However, this does not al-
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on the
Unit repeatedly until the display returns to the original dis-
play, and start from the first step.
22 |
ACEC
