ENGLISH
PRECAUTIONS FOR HANDLING
cKeep lighting equipment away from the camera.cNotes about the AC adapter:cNotes about the cable units:
If you have lighting equipment near the camera, the heatBe sure to connect the provided AC adapter to the color1. There may be some interference if you use more than
emitted from the lighting equipment may causeCCD camera via the provided cable units. Do NOTone cable unit at the same time. Keep the cable units as
deformation or failure to the camera.connect the AC adapter directly to the camera, otherwise,far away from each other as possible while using them.
the voltage will be unstable and cause serious damage to2. The picture may pick up some interference from external
cDirt on the cabinet should be wiped out lightly with a soft
the camera circuit due to excessive voltage.electromagnetic waves or other electrical wires through
cloth.
the provided wiring cable. Keep the wiring cable as
cNotes about the CCD camera:
cMost surface of the cabinet is made of plastics.short as possible for the connection and keep it away
The camera is not water-resistant. Do NOT use the camera
Wiping it with benzine and thinner may cause the painted
from the source of interference.
in places subject to rain, water or moisture.
film to deteriorate or come off.3. If the wiring cable is bundled during use, optimum
Do NOT push the lens strongly or apply any shocks.
cNEVER use pesticide near the camera.results may not be obtained due to mutual interference
The picture color tone may look different under fluorescent
Never use pesticide or other volatile components near thefrom the cable. Do not leave extra length of the wiring
lights.
camera.cable bundled.
There may be some video noise under minimum
Or, never leave rubber or vinyl products in contact with
illumination or due to a dark objectOs shadow image.
the camera for a long time.
The picture may become temporarily distorted while the
This may deteriorate the surface of the cabinet.
electronic iris adjusts itself in response to an abrupt change
in the quantity of light.
HOW TO CONNECT
Wiring cable
(the maximum transmission
distance is 100 m / 325 ft;
Cable terminals can
measured with a wiring cable
be connected to
equivalent to the provided one)
either end of the
wiring cable becauseTo AC outlet
Cable unit Athey have no polarity.Cable unit BYMake all other
Color CCD(to the camera)(to a TV)connections
camerabefore plugging
(with built-ininto an AC outlet.
condenserVIDEOAUDIO MICVIDEOAUDIO
INININDC OUTOUTOUTDC IN
microphone)
AC
adapter
To the video/audio
input connectors
TV
Refer to the
Y The audio input connector of cable unit A is not for useVideo/audio cableinstruction
(optional)manual of
with the color CCD camera in the CU-V803 KIT.
the TV/VCR
Y You can connect an external appliance to the audio input
being used
connector of cable unit A, however, the microphone input
VCR
and the audio input cannot be used at the same time.
SPECIFICATIONS
HOW TO ATTACH
Y Notes about attachment:
Camera
If you attach the camera to a wall, do not leave the cables slack. Children may
trip on the cables, which can cause the camera to fall, resulting in injury orPickup: 270,000-pixel 1/4" CCD
damage.TV system: NTSC
Lens: F2.0, f = 2.9 mm (fixed focus lens)
Attaching the cameraAttaching the cable unitsMinimum illumination :4 lx
Microphone: Built-in condenser microphone (DC 3 N 5 V )
Dimensions: 37 (W) x 50 (H) x 36 (D) mm (1-1/2" x 2" x 1-7/16")
Weight: Approx. 140 g (0.31 lbs)
Cable Unit
Input voltage: DC 12 V
Dimensions: 100 (W) x 25 (H) x 70 (D) mm (3-15/16" x 1" x 2-13/16")
Weight: Approx. 90 g (0.2 lbs)
AC Adapter
Input voltage: AC 120 V`
Output voltage: DC 12 V
Dimensions: 53 (W) x 82 (H) x 43 (D) mm (2-1/8" x 3-1/4" x 1-3/4")
Weight: Approx. 350 g (0.78 lbs)
E. & O. E. Design and specifications subject to change without notice. |