PLAYBACK Basic Connections
35
There are three basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.
Connection To A VCR [A]
(Editing, Dubbing and Playback)
NOTE:
Use the optional Audio and Video cables.
To AUDIOCONNECT CAMCORDER TO VCR
and VIDEOAudio and Video
As shown in the illustration at left, connect the
connectors1optional Audio and Video cables between thecables (optional)
AUDIO and VIDEO connectors on the camcorder
ABand those on the VCR.
To AUDIOSUPPLY POWER
If your TV/VCR
andTurn on the camcorder, the VCR and the TV.
has the SCART
connector, useVIDEO IN2
the providedconnectors
cable adapter.
SELECT MODE
Set the VCR to its AUX input mode, and set the TV
3to its VIDEO mode.
VCR
Connection To A TV With A/V Input
AerialConnectors [B] (Playback ONLY)
NOTE:
Use the optional Audio and Video cables.
CONNECT CAMCORDER TO TV
As shown in the illustration at left, connect the
1optional Audio and Video cables between the
AUDIO and VIDEO connectors on the camcorder
To AUDIO, VIDEO and
and those on the TV.
DC OUT connectors
RF unit RF-V5E
(optional)SELECT MODE
Set the TV to its VIDEO or AV mode (as specified in
2its instructions).
Connection To A TV With NO A/V Input
NOTES:
Connectors (Playback ONLY)
cIt is recommended to use the AC Power
Adapter/Charger as the power supply instead
NOTE:
of the battery pack.
Use the optional RF-V5E RF unit.
cTo monitor the picture and sound from the
camcorder without inserting a tape, set the
* Refer to the RF-V5E instruction manual for connection
camcorderOs power switch to CAMERA, then
procedure.
set your TV to the appropriate input mode.
cIf you have a TV or speakers that are not
specially shielded, do not place the speakers
adjacent to the TV as interference will occur
in the camcorder playback picture. |
ACEC
