PLAYBACK Basic Connections
38 EN
There are three basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.
Connection To A VCR A
(Editing, Dubbing and Playback)
WhenNOTE:
connecting theUse the provided Audio and Video cables.To AUDIO and VIDEO
cables, open
OUT connectors
the jack cover.CONNECT CAMCORDER TO VCR
Audio and VideoAs shown in the illustration to the left, connect the
cables (provided)1Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the VCR.
To AUDIO andSUPPLY POWER
VIDEO INTurn on the camcorder, the VCR and the TV.
connectors2
SELECT MODE
VCR
Set the VCR to its AUX input mode, and set the TV
3to its VIDEO mode.
Antenna
Connection To A TV With A/V Input
Connectors B (Playback ONLY)
NOTE:
Use the provided Audio and Video cables.
To AUDIO,
CONNECT CAMCORDER TO TV
VIDEO and RF DC
As shown in the illustration to the left, connect the
OUT connectors
1Audio and Video cables between the AUDIO and
VIDEO OUT connectors on the camcorder and
those on the TV.
RF unit RF-V5E (optional)
SELECT MODE
Set the TV to its VIDEO or AV mode (as specified in
2its instructions).
NOTES:
cIt is recommended to use the AC Power
Adapter/Charger as the power supply instead
Connection To A TV With NO A/V Input
of the battery pack.
cTo monitor the picture and sound from theConnectors (Playback ONLY)
camcorder without inserting a tape, set the
camcorderOs Power Switch to OCAMERA�,NOTE:
then set your TV to the appropriate inputUse the optional RF-V5E RF unit.
mode.
cIf you have a TV or speakers that are not*Refer to the RF-V5E instruction manual for connection
specially shielded, do not place the speakersprocedure.
adjacent to the TV as interference will occur
in the camcorder playback picture. |
ACEC
