MasterPage: Left
GR-D350UC.book Page 20 Wednesday, October 19, 2005 1:51 PM
VIDEO PLAYBACK
20 EN
I During playback, press and hold ! or 1. The
Normal Playbacksearch continues as long as you hold the button.
Once you release the button, normal playback
VOL. +/�resumes.!!!!
6666Lock ButtonI A slight mosaic effect appears on the display
1111during Shuttle Search. This is not a malfunction.
ATTENTION:
Speaker
During Shuttle Search, parts
of the picture may not be
clearly visible, particularly on
MENUthe left side of the screen.
7
1Load a cassette. ( pg. 16)Blank Search
2Set the Power Switch to OPLAY� while Helps you Ţnd where you should start recording
pressing down the Lock Button located on the in the middle of a tape to avoid time code
switch.interruption. ( pg. 19)
3To start playback, press 6.
1Load a cassette. ( pg. 16)
4To stop playback, press 7.
2Set the Power Switch to OPLAY� while
I During Stop mode, press 1 to rewind, or ! to
fast-forward the tape.pressing down the Lock Button located on the
switch.
To control the speaker volume
3Press BLANK.
Slide the Power Zoom Lever (VOL. +/�) towards
O+� to turn up the volume, or towards O�� to turn I The OBLANK SEARCH� indication appears and
the camcorder automatically starts reverse or
down the volume.forward search, then stops at the spot which is
NOTES:about 3 seconds of tape before the beginning of
I The playback picture can be viewed in the LCD the detected blank portion.
monitor, viewŢnder or on a connected TV. I To cancel Blank Search, press 7 or BLANK.
( pg. 21)
I If Stop mode continues for 5 minutes when power NOTES:
I Before starting Blank Search, if the current
is supplied from a battery, the camcorder shuts off position is at a blank portion, the camcorder
automatically. To turn on again, set the Power
searches in the reverse direction. If the current
Switch to OOFF�, then to OPLAY�.position is at a recorded portion, the camcorder
I When a cable is connected to the AV connector,
the sound is not heard from the speaker.searches in the forward direction.
I If the beginning or end of the tape is reached
during Blank Search, the camcorder stops
Still Playback
automatically.
Pauses during video playback.I A blank portion which is shorter than 5 seconds of
1) Press 6 during playback.tape may not be detected.
2) To resume normal playback, press 6 again.I The detected blank portion may be located
between recorded scenes. Before you start
I If still playback continues for more than about
3 minutes, the camcorderOs Stop mode is recording, make sure there is no recorded scene
automatically engaged.after the blank portion.
Shuttle SearchPlayback Snapshot
This camcorder allows you to take snapshots
Allows high-speed search in either direction
during video playback.during video playback.
Press SNAPSHOT.
1) During playback, press ! for forward
search, or 1 for reverse search.
2) To resume normal playback, press 6. |
ACEC
