50 ENSYSTEM CONNECTIONS
[A] Using PC connection cable
To
PC connection cable
RS-232C
To PC(optional)
PC
OR
[B] Using DV cable
Power Switch
Core filterCore filter
To DVDV cable (optional) To DV
connector
PC with DV
connector
Connection To A Personal ComputerNOTES:
I It is recommended to use the AC Adapter as the
[A] Using PC connection cablepower supply instead of the battery pack ( pg. 9).
This camcorder can transfer still images to a PC byINever connect the PC connection cable and the DV
using the optional software HS-V16KITE.cable simultaneously to the camcorder. Connect
[B] Using DV cableonly the cable you wish to use to the camcorder.
It is also possible to transfer still images to a PC withIThe date/time information cannot be captured into the
a DV connector by using software equipped with thePC.
PC or commercially available software.I Refer to the instruction manuals of the PC and
Software.
1Make sure the camcorder and PC are turned ofI The still images can also be transferred to a PC with af.
DV connector-equipped capture board.
2Connect the camcorder to your PC using theI When using a DV cable, be sure to use the optional
appropriate cable as shown in the illustration.JVC VC-VDV206U or VC-VDV204U DV cable
depending on the type of DV connector (4 or 6 pins)
3Turn the camcorderOs Power Switch to OPLAY�
on the PC, or use the DV cable provided with the
while pressing down the Lock Button located on thecapture board.
switch and turn on the PC.I The system may not work properly depending on the
YRefer to the instruction manual of the software onPC or capture board you are using.
how to transfer a still image to the PC.
4When finished, turn off the PC first, then the
camcorder. |
ACEC
