Fade/Wipe Effects FADER N WHITE
Fade in or out with a white screen.
These effects let you make pro-style scene transitions.
Use them to spice up the transition from one scene to FADER N BLACK
the next.
Fade in or out with a black screen.
Fade or Wipe works when tape recording is started or
when you stop recording. FADER N B.W
1Set the VIDEO/MEMORY Switch t to OVIDEO�,Fade in to a color screen from a black and white
then set the Power Switch @ to O � while pressingscreen, or fade out from color to black and white.
down the Lock Button $ located on the switch. Open WIPE N CORNER
the LCD monitor fully or pull out the viewfinder fully.
Wipe in on a black screen from the upper right to the
2Press MENU 4. The Menu Screen appears.lower left corner, or wipe out from lower left to upper
right, leaving a black screen.
3Press + or � 5 to select O (WIPE/FADER)�, then
press SELECT/SET 3. WIPE N WINDOW
4Press + or � 5 to select the desired function, thenThe scene starts in the center of a black screen and
press SELECT/SET 3. Selection is complete. Presswipes in toward the corners, or comes in from the
SELECT/SET 3 again.corners, gradually wiping out to the center.
Y The WIPE/FADER Menu disappears and the effect is WIPE N SLIDE
reserved. The indicator representing the selectedWipe in from right to left, or wipe out from left to right.
effect appears.
WIPE N DOOR
5Press the Recording Start/Stop Button ! to activate
the Fade-in/out or Wipe-in/out.Wipe in as the two halves of a black screen open to the
left and right, revealing the scene, or wipe out and the
To Deactivate The Selected Effect . . .
..... select OOFF� in step 4.black screen reappears from left and right to cover the
scene.
IMPORTANT WIPE N SCROLL
Some Fade/Wipe Effects cannot be used with certainThe scene wipes in from the bottom to the top of a
black screen, or wipes out from top to bottom, leaving a
modes of Program AE with special effectsblack screen.
( pg. 27). If an unusable Fade/Wipe Effect is
selected, its indicator blinks or goes out. WIPE N SHUTTER
Wipe in from the center of a black screen toward the
NOTE:top and bottom, or wipe out from the top and bottom
You can extend the length of a Fade or Wipe by pressing
and holding the Recording Start/Stop Button !.toward the center leaving a black screen.
t
!
$3
@4 5
Refer to the diagrams on page 52 and 54 for the controls, indications, indicators and
connectors mentioned.
EN
28FOR RECORDING |
ACEC
