GR-FXM42EN(EK)2.fm Page 13 Friday, December 2, 2005 9:46 AM
Y To record on a VCR using a compact cassette
and the adapter, cover the adapterOs recording
White to Audio safety hole with Adhesive tape.
Output64) To unload the cassette, turn the dial 5 in the
direction of OUNLOADING� all the way until it
stops.
Y The colour shown in the window 4 changes
Yellow to Video from green \ red \ blue (indicating unloading
Output7is possible).
Connector cover5) Slide the latch 1 to open the compartment
BASIC FEATURESdoor, then insert your Ţnger in the hole 6, and
A/V cablepush up and remove the cassette.
6) Close the compartment door 2.
2 Compartment door
4 Window
Recording
TVWhite to safety hole5 Dial
Audio Input
VCR
Yellow to The protec-
Video Input
tion sheet is
Tape Dubbing1 LatchafŢxed
1) Connect the camcorder and the VCR ( pg.3 Gear
12, OConnections To A TV/VCR�). Set the7 Reels
Power Switch # to OPLAY� while pressingCompact video cassette
down the Lock Button ", turn on the VCROs
power, and insert the appropriate cassettes in
the camcorder and the VCR.
Engage the VCROs AUX and Record-Pause
modes.
2) Press 3/8 & to Ţnd a spot just before the edit-
in point. Once it is reached, press 3/8 &6 Hole
again.
3) Press 3/8 & and engage the VCROs RecordY If there is slack in the video tape when
mode.inserting the compact cassette into the
4) Engage the VCROs Record-Pause mode andadapter, the tape may become damaged. To
press 3/8 &.take up slack in the tape, turn the gear 3 in
Y Repeat steps 2) through 4) for additionalthe direction of the arrow.
editing, then stop the VCR and camcorderY During tape loading and unloading, do not
when Ţnished.touch the reels 7 for safety and tape
Using The Cassette Adapter (Optional)protection.
Use this to play back a VHS-C video cassette
recorded with this camcorder on a VHS VCR.
1) Slide the latch 1 to open the compartment
door, then insert the cassette and close the
compartment door 2.
Y If the colour shown in the window 4 is green
or red, turn the dial 5 in the direction of
OUNLOADING� so that colour changes to blue.
2) Turn the dial 5 in the direction of OLOADING�
all the way until it stops.
Y The colour shown in the window 4 changes
from blue \ red \ green (indicating playback
is possible).
3) Load the cassette adapter into the VCR and
play the tape back.
13 |
ACEC
