19
BEGIN SOURCE PLAYBACK
5
Fast-forward or rewind the source tape to find
the desired scene, then start playback a little
before the scene.
STORE SCENE FOR PRINTING
6
When the desired scene is located, press
MEMORY. The image appears on screen and is
stored in memory.
YOnly one image is stored in memory,
regardless of the OMULTI PIX� setting.
PRINT STORED SCENE
7
Insert a print sheet with the print side (the side
with no writing on it) UP into the print sheet
insertion slot until it is pulled in automatically.
YThe Print Lamp comes on, indicating printing
is in progress.
YONOW PRINTING� appears on screen, on a
blue background.
YWhen the Print Lamp starts blinking, printing
is complete. Remove the print from the exit
slot. The Print Lamp goes out.
YThe number of images printed depends on
the selection you made in step 2.
If the stored image is shaky . . .
.... set OPIX STABILIZER� at the Print Menu to OON�.
If you want to switch between the image being input and the stored image . . .
.... press PICTURE SELECT. The input image and the stored image appear on the connected
TV alternately.
* During printing, the image being input alternates with ONOW PRINTING� (appears on a
blue background).
* During printing, noise or color changing may be visible on the connected TV. This is
normal and does not affect printing.
If you store the wrong image . . .
.... press PICTURE SELECT so the input image appears, then find the correct image and store
it in memory.
If you want to print multiple copies of the same image . . .
.... after printing, take the printed image out of the exit slot and insert a new print sheet in
the insertion slot.
* Do not attempt to insert a print sheet during printing, as this can result in malfunctions.
To print a Olive� image using a camcorder as the source . . .
.... in step 5, instead of playing back the source tape, engage the camcorderOs Record mode.
If youOre using a JVC camcorder, you can store a scene you want to print by pressing the
camcorderOs Start/Stop button (in place of the GV-PT1Os MEMORY button). Connect the
camcorderOs Editing connector to the PAUSE Connector on the GV-PT1 using the
camcorderOs supplied Editing cable (or a commercially available f 3.5 Mini plug cable). |
ACEC
