HA-W500RF (EK) 6/17/2002 18:43 Page 12
HOW TO USEHOW TO USE
1. Connect the transmitter and AV equipment. (Refer to page 7)5. Adjust the volume control of the connected AV equipment and the
2. Connect the AC adaptor to the transmitter, then plug the AC adaptor into anheadphones, and set them to the desired listening level.
AC outlet. (Refer to page 8)6. Turn the TUNING control to get the best reception in the headphones.
3. Turn on the power on the transmitter and the connected AV equipment.
In cases of interference or too much noise, select the CHANNEL switch on
the transmitter to another position, then repeat step 6.
To set optimum signal reception, adjustments
should be done within a range of approx. 7 m
between the transmitter and the headphones.
Transmitter power
When an audio signal is input, the transmitterOs power is turned on automatically, and the
indicator lights in green. Also, when no audio signal is input for about a minute, theWithin approx. 7 m
indicator goes out automatically and the power turns off. (Automatic Power On/Off function)
VOL.The Automatic Power On/Off function is activated from audio on the left channel. The
function may not activate properly in situations when the audio signal is detected only from
MAX. MIN.the right channel.
In some situations, the power may not be turned on automatically by the input
sound (e.g. a song with a quiet opening or gradual fade-in). This is not a
4. Turn on the headphonesO power. To avoid excessive volume, first set the
headphonesO volume to a low level.
Tips for better use
For improved sound quality, set the volume level of the connected equipment as high as
possible without causing distortion, while setting the volume level of the headphones to a
slightly lower level.
After use
Keep the headphonesO power off.
Notes:
1. When using the headphones, donOt raise the volume excessively. Continuous listening
Before using the headphones for the first time, charge the rechargeable Ni-Cd battery.for a long time at high volumes may damage your hearing.
2. For safety reasons, do not use the headphones while riding a bicycle or driving a
motorcycle, car, etc.
1213 |
ACEC
