Troubleshooting
PROBLEMS CHECK
There is no power See if the power cord became unplugged.
Check for a blown fuse or circuit breaker or a power outage.
It is possible the fan is stuck or the inside temperature is rising abnormally.
Consult your dealer.
There is no picture The antenna could be disconnected.
or sound The input mode could be set improperly. See page 64.
The tuner (Auto Tuner Setup) could be set improperly. See page 34.
The TV station may be having difficulties. Check to see if other stations are working.
Use the HDMI cable with HDMI logo . See page 20.
Remote control is not Check to see that the batteries are still working and properly installed.
operating properly or Make sure the remote has a clear sight path to the TV.
at all Check that the TV/CATV switch is in the proper position.
You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a Make sure the channels have been programmed. See "Channel Summary", page 35.
certain channel Check to see if the channel is locked. See "Channel Summary - Lock" page 36.
The power turns off Make sure the set did not become unplugged.
by itself Perhaps the On/Off Timer is set. See page 60.
Check to see if the Sleep Timer was set. See page 67.
It does not operate This television is operated by a microprocessor. It is possible that external noise or
correctly interference is causing the problem. If the television does not function correctly, remove the
electrical plug from the wall outlet and wait a while before inserting it into the wall outlet
again and operating the television.
The clock is wrong The power was interrupted and the clock was not reset. See page 59.
The color quality Tint and Color may be improperly adjusted. See page 55.
is poor The Video Status mode may be turned to the wrong setting. See page 66.
There are lines There could be interference from another electrical appliance, such as a computer,
across the picture another TV or VCR. Move any such appliances further away from the TV.
The picture is spotted There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
There are double A building or passing airplane can reflect the original signal and produce a second,
pictures (ghosts) slightly delayed one. Adjust your antenna position.
Picture is snowy Your antenna may be damaged, disconnected or turned. Check the antenna
(image noise) connection. If the antenna is damaged, replace it.
Screen is 80% black The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 45.
Stereo or bilingual Make sure the MTS settings are correct. See page 67.
programs can't be
heard
The POWER LED It may be a malfunction that the fan is locked or the temperature has increased.
and LAMP LED are
blinking
alternately.
The POWER LED The lamp may not have been installed correctly, or it may be due to a malfunction.
and LAMP LED are The lamp door may not be closed correctly.
blinking rapidly
simultaneously.
The LAMP LED It may be a malfunction of the internal electrical circuits.
continues blinking
80
LLCT2063-001A-A ENG.indd 80CT2063-001A-A ENG.indd 8011/27/06 9:18:15 AM/27/06 9:18:15 AM |
ACEC
