ELECTRICAL CONNECTION
1) ELECTRICAL CONNECTIONS2.2 Non-polarized plugs (e.g. 2 pin with side
?Warning - this appliance must be earthed?earth contact)
This appliance is normally supplied wiThth e wirea which is coloured GREEN AND
mains lead having a plug fitted in the faYELLctoOW mry ust be connected to the earth
which has been checked for correct eartchon tact. The other two wires should be
continuity. connected to the two pins, irrespective of
If the fitted plug is not suitable for coyolour sur.ocket
outlet, or if the m?s maachininse lead is not
3) FUSE REPLACEMENT
fitted with a plug, you should fit a suitable new,
good quality plug by following the instIf tructhe ionmas iinsn lead of this appliance is fitted with
(2) below.a BS 1363A 13 amp fused plug, replace the
Any unsuitable plug should be cut off andfus e only with an A.S.T.A. approved type
conforming to BS 1362 and proceed as follows:
disposed of in order to avoid a possible shock
hazard should it be inserted into a socket.
2) CONNECTION TO A REWIRABLE PLUG - to
be carried out only by a qualified electrician
The wires in the mains lead are coloured in
accordance with the following code:
BLUE - ?NEUTRAL ? (?N?)
BROWN - ?LIVE? (?L?)
GREEN AND YELLOW - ?EARTH ? (?E?)
To fit a new plug, proceed as follows:
2.1 Polarized Plugs (e.g. 3 pin, 13 amp plug
conforming to BS 1363A)
a. The GREEN AND YELLOW wire must be
connected to the terminal in the plug which
1. Remove the fuse cover (A) and the fuse (B).
is marked with the? El?e ortte byr the Earth
2.Fit the replacement 13 A fuse into the fuse
symbol or coloured yellow or green and
cover.
yellow.
b. The BLUE wire must be connected to th3.e Refit both into the plug.
terminal which is marked with t?N?h e lFoettr aler l other types of plug, the supply socket
or coloured black.should be protected by a 16 A fuse or circuit
c. The BROWN wire must be connected to thbreake er at the distribution board.
terminal which is marked with ?Lthe? letter
or coloured red.
19 |
ACEC
