Connection of external equipment
You can connect additional equipment, such as VCRs, camcorders
etc. to your set.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
2
2. Connect the aerial cable to the RF aerial in socket of the VCR.
1
75Y
3. Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
4. Select the programme number where the VCR channel is
stored.
VCR
5. Press the PLAY button on the VCR.
Euro scart socket(s)
1. Connect the euro scart socket of the VCR to the Euro scart
socket 1 or 2 of the set.
2
2. Press the PLAY button on the VCR.
1
75Y
If your VCR outputs a switching voltage connect to Euro scart
socket 1. If Auto AV on is selected, the set will switch to AV1
mode automatically.
VCROtherwise, press the TV/AV button on the remote control
handset to select AV1 (AV) or AV2. The VCR playback picture
appears on the screen.
You can also record programmes received by the TV on video
tape.
Note :
a. Euro scart 2 (and AV2) is an optional function. Only a set with
the Euro scart 2 (and AV2) can perform this function.
b. Signal type RGB, i.e. the signals red, green and blue can only
be selected for the Euro scart socket 1 (not Euro scart 2) with
Auto AV on. These signals are transmitted, for example, by a
computer, pay TV decoder, game machine or photo CD unit,
etc.
To return to normal TV viewing, disconnect the RGB signal
source.
18 |
ACEC
