RECORDING
The numbers between parentheses refer to the fold-out.
Remarks about recordingRecording modes
ENGLISHY If the disc is a CD-RW and is already finalized you mustThe CDR631 offers several recording modes.
unfinalize it first to record onto it.- - synchronised recording of a whole disc
Y The recording procedure is the same for CD-Rs and CD-based on the tracks from a source CD, DAT, cassette or
RWs.
other source.
Y If the disc already contains recordings, the CD-Recorder will- - synchronised recording of a single
automatically search for the end of the last track, so that re-track based on a single track from a source CD, DAT, cas-
cording can start from there.sette or other source.
Y There must be at least 7 seconds of recording time left- - manually controlled recording from an ex-
on the disc, otherwise you will not be able to enter recordternal source.
standby mode. will light up.
Y A maximum of 99 tracks can be recorded on a disc. Minimum- - same as the RECORD DISC function except
that the CDR631 will automatically finalize the recorded CD
allowable track length is 4 seconds.once recording is finsihed.
Y Recordings from DAT or DCC players will not always stop
automatically.
Y SRC (Sample Rate Conversion)
This CD-Recorder can perform Sample Rate Conversion on
the incoming signal, it is capable of handling sources ranging
from 11 kHz up to 56 kHz.
If no 44.1 kHz (? 100 PPM) source is connected, this CD-
Recorder will automatically switch on the SRC.Some remarks on recording:
Y If the source is 44.1kHz (? 100PPM) the SRC will be auto-- When Auto track is on (default setting), track numbers will
matically bypassed.automatically be increased during recording.
Y See page 19 for information about the recording menu set-
- If a finalized CD-R disc is inserted in the CD-Recorder,
tings. will be displayed. Recording is not
possible.
Important:
If you want to play a recorded CD-R disc on any regular CD- If a finalized CD-RW disc is inserted in the CD-Recorder,
player, it must first be finalized. (See FINALIZING/ and will be displayed
UNFINALIZING.)when the REC MODE (26) is pressed. If the REC LEVEL/
SELECT (19) knob is pressed, the disc will be unfinalized.
Finalized CD-RW discs play only on CD-RW compatible CD
players.- If the recording source is a special disc such as HDCD or
DTS, you have to
See page 1 for more information on CD-R and CD-RW discsY set the sampling frequency to 44.1kHz.
and Conpact Disc Care.Y use a digital connection.
Y set the digital rec-volume of the CDR631 to 0 dB.
Warning:- When you copy the tracks from a DAT recorded by different
Recording is no longer possible after finalizing a CD-Rsampling frequencies, noise might be recorded in the disc
disc!when the sampling rate changes.
9
CDR631(U)_Eng_P01-11.p6598/4/00, 9:29 AM |
ACEC
