Owners Manual FS-1LOwners Manual FS-2U
The FS-1L incorporates an ON/OFF-switch in a metal housingThe FS-1U incorporates a momentary-switch in a solid metal
with a big strong button. ON/OFF-switches (latch-type) arehousing with a big strong button. Momentary-switches
used in most amplifiers, e.g. for channel switching or reverb(unlatch-type) are mostly used by computer controlled
switching. The FS-1L can be operated without battery. Whenequipment like multieffect, keyboards, etc. e.g. all NOBELS
using a battery, the LED will indicate the state of the switch:effect pedals can be remote controlled by a momentary switch.
LED ?ON?= switch is closedSome equipment needs a switch that is open and only closes,
when pressed. Other equipment needs a switch that is closed
LED ?OFF?= switch is openand opens, when pressed. Both functions are possible with the
FS-1U.
You can adjust the polarity of the FS-1U switch
A) BACKVIEW:with the slideswitch ?Polarity?.
On the backside is the ?OUT" jack of the
FS-1L.
The battery cover is on the bottom side. Use a coinA) BACKVIEW
or a big screwdriver to open it.
On the backside is the ?OUT" jack of the
FS-1U.
Please note: Remove the battery, if you do
not need the FS-1L for a longer period of time.
B) CONNECTION:B) CONNECTION:
Connect a mono cable to the ?OUT? jack of the FS-1L and to the remote jack of your amplifier.Connect a mono cable to the ?OUT? jack of the FS-1L and to the remote jack of your amplifier.
Please make sure that the unit which has to be switched, is prepared for latched-type footswitches!Please make sure that the unit to be switched is prepared for unlatched footswitches!
If the unit only switches afterIf the unit only switches while
using the footswitch twice, theholding the footswitch, the unit
unit needs a UNLATCHED typeneeds a LATCHED type
footswitch!footswitch!
For this you have to use the NO-
BELS FS-1U!
For this you have to
use the NOBELS
FS-1L!
For more information please contact your local dealer!For more information please contact your local dealer!
KTA 980410-0244 |
ACEC
