Finalization
AUDIO CD RECORDER
DUAL OPTICAL INPUT REC
ON / OFFCD DUBBINGEDIT/NOAMCS
FINALIZEYES
STANDBYPUSH TO() ENTERYES
INPUTDISPLAY
CDR-205X
FINALIZE
The finalization process writes the TOC data (tracks,When finalization finishes
etc.) for the disc in a special area on the disc calledThe CDR-205X automatically stops.
the PMA.
To stop the finalization process
After finalization
Press the e button (before pressing the YES button
CD-Rs can be played in CD players. Even afterin step 3).
finalization, CD-RWs can only be played on CD
players that are compatible with CD-RWs.Display after finalization
For finalized CD-Rs, you cannot add moreFor CD-Rs, the display becomes that for CDs. For
recordings, place SKIP commands, or remove SKIPCD-RWs, the display does not change, except that
commands.FINALIZE is added.
Notes:
1Insert the CD-R or CD-RW to be finalized
Y Never turn off the power or remove the
into the CDR-205X.power cord during finalization. Doing so
may damage all the data on the disc.
If the power is turned off by mistake or if a power
2Press the FINALIZE button.
outage occurs, the remaining operations will
FINALIZE
resume when power is turned back on. However,
FINALIZE
there are times when the operations are not
properly resumed and the disc is not restored.
Y Never finalize discs that are scratched, dirty, or
Memo:dusty. Doing so may prevent the process from
If the CDR-205X is left in the finalize standbybeing properly completed. If the process does
state for more than 10 minutes, then it willnot finish in 10 minutes, press the e button and
automatically exit the state and return to normalabort the process. This disc will not be able to be
operation.played with normal CD players.
Y During finalization, the operation button on the
CDR-205X will be disabled.
3After the time information appears,
press the YES button.
YES
Finalization begins. During finalization, the
remaining time is displayed. (Finalization takes
approx. 4 minutes.)
32 |
ACEC
