Using Banner Display
DVDVCDCD
Changing the Camera AngleUsing IntroScan function
Track : 1Track : 2Track : 3
Angle : 1 Angle : 2Angle : 3
If the scene was recorded from multiple angles, you can easily
change the camera angle of the scene you are watching.IntroScan plays the first few seconds of each track on the Video CD
or CD similar to the scan feature that's on many car radios.
Press ON SCREEN during playback.
1When playing a Video CD, press ON
SCREEN to display the Banner1
Display.
When playing a CD, the Banner Display
appears on the screen automatically.
Press 2/3 until the Angle icon is
2
highlighted.Press 2/3 until the IntroScan icon
is highlighted.2
Press ENTER.
The angle menu appears.3
Press ENTER.
The INTRO indicator lights.3
The first 10 seconds of each track will be
played.
Press ENTER to select the angle.4Press L to stop IntroScan playback and start
Each time you press ENTER, the angle
changes.playing the current track entirely.
Note
After IntroScan goes through all of the tracks, it stops.
To turn off the angle menu
Press ON SCREEN or CLEAR.
The menu is switched off when no operation is performed for
about 5 seconds.
Using ANGLE on the remote controller
1 Press ANGLE on the remote controller during playback.
2 Press ANGLE or ENTER to select the camera angle.
Notes
Y You can change the camera angle during still playback. The camera
angle changes to the new setting when you resume normal playback.
Y If you pause a picture immediately after changing the camera angle, the
resumed playback picture may not use the new camera angle.
23
SN 29343266 DPC-5.2 |
ACEC
