Index parts and facilities
To set the output to the source channel, press the desired button
Rec Out, Zone 2, Off, Level / buttons, and Zone (Rec Out or Zone 2) twice in succession. To turn off the output,
2 indicator [49, 50]press the Off button. The Zone 2 indicator lights when a signal is
output to the remote zone (Zone 2). When the Zone 2 indicator is
The Rec Out and Zone 2 buttons allow you to use the DTR-6.4/5.4
to output to a remote zone (Zone 2) or to another component foroff, then either output to the remote zone is turned off or Rec Out is
recording (Rec Out). Press the Rec Out button to output the audioselected. Press the Level / buttons to enter the mode for
signals to a recording component for recording. Press the Zone 2adjusting the volume in the remote zone (Zone 2).
button to enjoy the output from the DTR-6.4/5.4 in a different room,Note:
which is referred to as the remote zone (Zone 2). When eitherThe Rec Out and Zone 2 buttons use the same circuit and therefore
button is pressed, the currently selected input source for recordingcannot be used at the same time. When Rec Out is selected, nothing
or outputting to the remote zone is displayed in the front panelis output to Zone 2. When Zone 2 is selected, Rec Out is
display. If OSOURCE� is displayed, then the same input source asautomatically Ţxed to Source.
that selected for the main zone will be output.
To select an input source, press the desired button (Rec Out or Zone
2) and then press one of the input source button within 5 seconds.
That source will be output for recording or viewing in the remote
zone.
Front panel display
MUTING indicatorMulti function display
Flashes when the mute function is turned on.During normal operation, shows the current input source and
volume. When the FM or AM input is selected, shows the frequency
and preset number. When the Display button is pressed, shows the
Listening mode or digital input format indicators
One of these indicators lights to show the format of the currentlistening mode and input source format. However, does not show
input source. In addition, one of the listening mode indicators lightsthe source format when the FM or AM source is selected.
to indicate the current listening mode.
SLEEP indicator
Tuning indicatorsLights when the sleep timer is turned on.
TUNED indicatorZONE 2 indicator
Lights when a radio station is received.
AUTO indicatorLights when using the remote zone (Zone 2).
Lights when receiving FM broadcasts in the stereo mode. TurnsREC OUT indicator
off when placed into the monaural mode.
MEMORY indicatorLights when recording the input source from one component to
Lights when the Memory button is pressed to preset a radioanother (Rec Out)
station.
FM STEREO indicator
Lights when an FM broadcast station is received in stereo.
10 |
ACEC
