Setting menus
SW MODE screen
Item/Item/
Description of settingsDescription of settings
(display mode)(display mode)
MID GAINFor setting the gain value which is to beUSER1For setting the operation of the function
(Camera)allocated to the M position of the GAIN(Camera)allocated to the USER1 button.
switch.COLOR BAR:
0 dB, 3 dB, 6 dBThe color bar display is set to ON or
OFF.
HIGH GAINFor setting the gain value which is to be
SPOTLIGHT:
(Camera)allocated to the H position of the GAIN
The auto iris control for the spotlight is
switch.
set to ON or OFF.
6 dB, 9 dB, 12 dB
BACKLIGHT:
ATWFor setting the ATW (Auto Tracking White)The auto iris control for backlight
(Camera)function which is to be allocated to thecompensation is set to ON or OFF.
WHITE BAL switch.BLACKFADE:
OFF:When the button is held down, the whole
The ATW function is not activated.image is faded out into black. The
However, if it has been set in the AUTOsound is also faded out at the same
button or USER button, it will follow thetime.
operation of the button concerned.WHITEFADE:
Ach:When the button is held down, the whole
The ATW function is activated when theimage is faded out into white. The
WHITE BAL switch has been set to the Asound is also faded out at the same
position.time.
Bch:MODECHECK:
The ATW function is activated when theWhen the button is pressed, the camera
WHITE BAL switch has been set to the Bstatus currently set is displayed in the
position.viewfinder and on the LCD monitor
PRE:where it can be checked.
The ATW function is activated when theATW:
WHITE BAL switch has been set to theThe operation of the ATW function is set
PRST position.to ON or OFF.
ATWLOCK:
HANDLE ZOOMFor setting the zoom speeds which are to
(Camera)be allocated to the positions of theWhen the button is pressed, the white
balance value is fixed; when it is pressed
HANDLE ZOOM switch.
L/OFF/H:again, the operation of the ATW function
is performed.
LOW/OFF/HIGH are set to the 1/2/3
positions. (At OFF, no zoom operationsGAIN:18 dB:
are performed.)When this button is pressed, the gain is
L/M/H:set to 18 dB.
LOW/MID/HIGH are set to the 1/2/3O The picture may be temporarily
positions.disturbed when the gain has been
switched to 18 dB or from 18 dB to
another value.
USER2For setting the operation of the function to
(Camera)be allocated to the USER2 button.
The settings are the same as for the ones
for the USER1 items.
BACKLIGHT
The underlining indicates the factory setting.
39 |
ACEC
