Parts And Their Functions
123
BATTERY
CAMERAPUSH OPENSW OUTININRS-232C
AUDIOVIDEO
OUT
OUTMIC
ALARM RESET INTAPE END OUT
AC IN
GND
WARNING/
ALARM IN COMMON REC INREC OUTREMOTE
45t67809 qw er
1
Camera switching output connector9
Tape end output connector
Camera switching output connector; connect it to the
When the cassette tape comes to its end during recording,
frame switcher.
the alarm device installed externally is activated.
2
Audio input/output connectors0
WARNING/REC output connector
Audio input/output connectors (phono jacks)
When trouble has occurred in the unit, the alarm device
installed externally is activated.
3
Video input/output connectors
Error warning or recording low signal selected on the
Video input/output connectors (BNC); connect the input
menu screen 3 is output.
connector to the video camera, etc. and the output
connector to the TV monitor, etc.q
GND Terminal
This terminal is connected to the signal ground terminal
4
AC IN connector
of the connected unit in order to reduce noise. It is not
Connect the supplied power cord to an AC outlet.
connected to ground for safety purposes.
5
Alarm input connectorw
MIC input jack
Alarm recording input connector; connect it to the
Input jack (3 mm) for an external microphone.
external sensor.
This jack has precedence when signals are supplied
simultaneously to this jack and the audio input
6
COMMON terminal
connectors.
7
Alarm reset input connectore
REMOTE control connector
Input connector for releasing alarm recording; a +4 to
For connecting the AG-A11 remote controller which is
+14 V DC voltage is required.
available as an optional accessory.
8
REC IN connectorr
RS-232C connector
Input connector for recording
With this connector, basic operations of the unit can be
Note:
controlled using a personal computer (etc.)
Do not input the signal to this connector while the tape is
rewinding automatically in the repeat mode.tBattery installation area
Install the battery in this area. See OLithium Battery� on
page 3.
8 |
ACEC
