Installing the SDI card
Always ask your local dealer to install
CAUTION:
the SDI card.These servicing instructions are for use by
qualified service personnel only. To reduce the
risk of fire or electric shock do not perform any
Before installing the SDI card:
servicing other than that contained in the
ORelease the static carried in the body of the person
to perform the installation.operating instructions unless you are qualified
to do so.
Installation can be performed more safely if an anti-
static wrist strap is worn.
Touching the card without first releasing this static
may cause malfunctioning.
ODo not allow the metal part of the card come in
contact with any other metal parts.
Turn the power to the camera off and remove any
1Rear panel
cables which are connected to the power
connector or other connectors.
VIDEO OUT
Loosen the 4 screws on the rear panel of theOPTION CARDI/F REMOTE
2
camera, then remove the panel itself.MENUG/L IN
ITEM/AWC
IRIS
YES/ABC
Loosen the 2 screws on the optional card slotNO/BARDC12V IN
3
cover, then remove the cover.
Optional card slot cover
Align the SDI card with the guides and insert it.
4
Ensure the card is fully inserted.
Firmly tighten the 2 screws to the optional card
5
slot.
If the screws are misplaced, use the extra screwsF I/F
EV
supplied with this product. (6 mm in length)VIDEO OUTMOTE
OPTION CARDI/F RE
SDI OUT
MENUG/L IN
C
Firmly secure the rear panel with the 4 screws.ITEM/AW
6IRIS
YES/ABC
If the screws are misplaced, use the extra screws
NO/BAR
DC12V IN
supplied with this product. (8 mm in length)SDI card
Screws (6 mm)
Screws (8 mm)
5 |
ACEC
