Setting and changing of menu items
o Optional card settings submenu
3 Safety zone (1 to 4, OFF)
This selects the type of safety zone that
1
2is displayed in the viewfinder.
3If OFF is selected, a safety zone will
4not be displayed.
<Note>
The safety zone and the center marker
reflect the electrical positions which may
differ from the optical positions.
1 Zebra indicator (ON, OFF)
This sets the zebra pattern display
which appears in the viewfinder.
ON: Zebra patterns are displayed in
the viewfinder.
OFF: Zebra patterns are not displayed
in the viewfinder.
<Note>
Even if ON is selected for this setting,
the zebra patterns will not be displayed The inner frame and the outer frame
in the viewfinder if CVBS has been are approximately 90% and 95%,
selected as the EVF output 4 setting.respectively, of the safety zone.
2 Level (70% to 110%)4 EVF output (Y, CVBS)
The zebra patterns are displayed to use This sets the signals to be output to the
as a yardstick for the brightness level.viewfinder.
Y: Brightness signals are output to
<Note>
the viewfinder.
These settings are available when
CVBS: Color signals are output to the
ON has been selected for the Zebra
viewfinder.
indicator 1 setting.
<Note>
The zebra pattern is not displayed in
the viewfinder when CVBS has been
selected.
- 1 (E) - |
ACEC
