Installation
The following is the procedure to mount the control unit over the wall with the supplied mounting bracket.
When mounting, follow the procedure. After mounting the plate, secure the control unit to the mounting plate. Otherwise, it may
drop and cause damage or injury.
1. Attach the anchor into the wall and attach the supplied mounting bracket to the anchor.
Use an anchor bolt which meets the standards shown in the following figure.
10 mm {2/5 in.} or less
Wall
Mounting bracket
2 mm {2/25 in.} (D)
Wall TypeScrew Type
TAPMARK concrete screw anchors
Concrete wallPart No. 21230,
Size 6.35 x 57.15 mm {1/4 x 2 -1/4 in.}
TAPMARK concrete screw anchors
Plaster wallPart No. 21240,
Size 6.35 x 69.85 mm {1/4 x 2 -3/4 in.}
Hit the anchor into the wall by referring the following figure.
362.4
25013
302-4M
4-R4.5
8
13
4-A20
280324.2
13
(Unit of length: mm)
9342
15 |
ACEC
