INSTALLATIONS AND CONNECTIONS
WARNINGY Keep the unit away from:
Ydirect sunlight or light reflection.
The installation described in these figures should be made
Yincandescent or halogen lighting.
by qualified service personnel or trained system installers.
Yplaces where shadow appear over the front panel.
Ynoise. (for example, places near air conditioners or ven-
Cautions:
tilators)
Y This system must be installed within the protected
Yelectricity.
promise in accordance with the National Electrical
Youtdoor places.
Code (NFPA70), and the local authorities having juris-
Yvibration. (It may cause invalid recognition or injury.)
diction.
Y Do not place anything inside the space described in
Y Attach this unit to a flat wall with the supplied mounting
the illustration.
bracket. After the installation, secure the unit to prevent
Y This unit is for indoor use only.
dropping.
Y This unit must be mounted horizontally on the wall.
Y Determine the optimum mounting height. The recom-
Caution on Installationmendation is between 1.38 m {54 in.} and 1.5 m {60 in.}
for enrollment/recognition effectiveness.
Secure the unit with the supplied mounting bracket to pre-
Y Mount the bracket on the wall. Be sure to provide
vent vibration, dropping and injury.
access for video control and DC power from the control
unit.
Notes:
Y Keep the unit:
Yin the temperature between 0!C and 40!C {between
32!F and 104!F} and the humidity between 30 % and 80 %.
Top ViewSide View
Keep this area free400 mm {16 in.}Keep this area free700 mm {28 in.}
from obstructionsfrom obstructions
430 mm {17 in.}211 mm {18 in.}
80 mm {3 in.}
400 mm {16 in.}700 mm {28 in.}
400 mm {16 in.}900 mm {35 in.}400 mm {16 in.}900 mm {35 in.}
1 300 mm {51 in.}1 300 mm {51 in.}
1 380 mm {54 in.} or more (recommended)
Floor
System Instruction (Maximum System)
Coaxial cable (BNC)
OKNG
Camera power cable
BM-ET500
(For recognition)
Coaxial cable (BNC)
OKNG
BM-ET500
OKNG
(For
enrollment)BM-ET500
(For recognition)
General-purpose
BM-ED500
power supply *
(24 V DC)POWERALARMS3S2S1
Camera 1
Camera 2
Camera 3Electric lock*
Administration PC*
Wiegand
or RS-485
Electric lock*
Door control box* Access server*
LAN
* The use of the Administration PC was not evaluated by UL.
* The use of electric lock was not evaluated by UL.
* The use of door control box was not evaluated by UL.
* General-purpose power supply must be a UL Listed access control power limited device.
In the case of Wiegand / RS-485 use
11 |
ACEC
