How To Use On Screen Menu
INPUT SELECT (continued)INPUT SELECT (continued)
_ SDI input unit mounted [BT-Y200P]RGB
Used to select the format in case of RGB input.
[INPUT SELECT] Set-value (underlined is default value)
1)2)
AUT O*1080/60I*1080/50I
>[LINE A,B/S-VIDEO] AUTO1035/60I*2)720/60P*3)576/50I
NON-STANDARD OFF480/60P*4)480/60I*4)
[SDI] AUTO
RGB-SYNC (When RGB is input.)
Used to select Ext. Sync/GREEN-On-SYNC.
Set-value (underlined is default value)
EXTG-ON
*1) In AUTO setting, the settings of display size, status display, and
INPUT SELECT SDI menumatrix are same as for 1080I even in case of 1035I input. When
desired to use 1035I setting, set it to 1035/60I.
2)
SDI*1080/60I and 1035/60I are different with respect to the display
Used to set the input format of SDI.size and the matrix used. Select 1080/60I and 1035/60I even in
Set-value (underlined is default value)case of 1080/59.94I and 1035/59.94I signal input. The status will
1)be correctly displayed on the screen.
AUT O480/60I*576/50I
3)
*Select 720/60P even in case of 720/59.94P signal input. The sta-
tus will be correctly displayed on the screen.
*1) 480/59.94I signal is displayed as 480/60I.
*4) 480/59.94I and 480/59.94P signals are displayed as 480/60I and
480/60P.
_ Component/RGB input unit mounted [BT-YA100P]
[INPUT SELECT] MAINTENANCE
>[LINE A,B/S-VIDEO] AUTO
[MAINTENANCE]
NON-STANDARD OFF
[YPbPr/RGB] YPbPr
RUNNING TIME
YPbPr AUTO
OPERATION 0H
COMPONENT LEVEL SMPTE
LCD 0H
[RGB] AUTO
BACKLIGHT 0H
RGB-SYNC EXT
FAN 0H
INPUT SELECT YPbPr/RGB menu
MAINTENANCE menu
YPbPr/RGB
Used to select the input of YPbPr/RGB.
Set-value (underlined is default value)With MAINTENANCE selected, the following menu will ap-
YPbPrRGBpear.
YPbPrOPERATION
Used to select the format in case of YPbPr input.The total operation time of the whole LCD monitor is displayed.
Set-value (underlined is default value)
1)2)
AUT O*1080/60I*1080/50ILCD
2)3)
1080/24psF1035/60I*720/60P*The operation time of the LCD panel is displayed.
4)4)
576/50I480/60P*480/60I*
BACKLIGHT
COMPONENT LEVEL (480/60I only)The operation time of the backlight is displayed.
Used to select the input level of component. Select SMPTE
for the signal from II VTR, M and B75 for the signal of 7.5%FAN
setup of Betacam VTR.The operation time of the exhaust fan is displayed.
Set-value (underlined is default value)
SMPTEB75
10 |
ACEC
