How to use the on-screen menus
Y PICTURE menu
The menu items shown below appear when the PICTURE menu is selected on the main menu.
[PICTURE MENU]PHASE
MODE BROADCASTThe phase can be adjusted here.
CONTRAST 60
BRIGHT 30Use the blue-only function to adjust the level while viewing
CHROMA 30the SMPTE color bars.
PHASE 30
SHARPNESS 30
AI OFF
NR OFFSHARPNESS
COLOR TEMP D93
3D Y/C OFFThe appropriate sharpness in line with the signal
[LORD FACTORY]characteristics can be set here.
AI
Dynamic images can be received when this is set to ON.
MODE
The video mode is selected here.NR
e BROADCASTThis is set to ON when the signal-to-noise ratio for the video
This mode is set at the factory to best suit broadcastsignals received is problematic.
operations.
e GENERAL
COLOR TMP
This mode applies the dynamic settings which were setThe color temperature can be adjusted here.
at the factory for generally receiving images.
The color temperature is adjusted to comply with the D65
e USER
and D93 standards at the factory.
This mode enables the mode set by the user to beFor consumer products, the color temperature is normally
established. BROADCAST is the factory setting.
set higher.
CONTRAST
3D Y/C
The contrast can be adjusted here in line with the conditionsThis is for the 3-dimensional Y/C separation function.
of the indoor work environment.
The picture quality is different when the function is ON and
when it is OFF.
BRIGHT
The black level can be adjusted here.
LOAD FACTORY
This is selected when the factory settings are to be restored.
CHROMA
The chroma level can be adjusted here.
Use the blue-only function to adjust the level while viewing
the SMPTE color bars.
<Notes>
When any changes are made to the settings on this menu, the changes also take effect for the settings of other linked
video signals for some of the video signals which have been selected. How the changes are linked is explained below.
e Any changes made to the settings when the LINE A signal has been selected will also be made to the LINE B
signal. Conversely, any changes made to the settings when the LINE B signal has been selected will also be made
to the LINE A signal.
e When the optional SDI input unit (BT-YA210G) is installed, any changes made to the settings when the CMPNT
480i signal is selected will also be made to the SDI signal. Conversely, any changes made to the settings when the
SDI signal is selected will also be made to the CMPNT 480i signal.
8 |
ACEC
