Starting Up/Shutting Down
Starting Up
Latch
1Open the display.
1Pull the carrying handle forward.
32Lift up the latch.
3Lift open the display.
2
1
Power2Turn your computer on.
Indicator Press the power switch and hold it for approximately one second until the power indi-
cator turns on before releasing it.
CAUTION
While booting, avoid the following until the hard disk drive indicatorhas
turned off.
? Connecting or disconnecting the AC adaptor.
? Touching the power switch.
? Performing any keyboard, touch pad, touchscreen or external mouse opera-
tions.
? Closing the display.
Once the computer is powered off, you must wait at least ten seconds before
Power Switch powering it on again.
When the CPU temperature rises, the computer may not power on to prevent the
CPU from overheating. Should this happen, allow the computer to cool down
then switch the power on again.
If the computer still does not power on, contact Panasonic Technical Support.
Operation( page 41)
NOTE
You may encounter the following situations when the computer is turned on at
very low temperatures. These functions are designed to prevent hard disk drive
malfunctions that may occur at low temperatures.
SituationAction
The computer turns on,The computer is warming up before start up. Wait for
and the message ?Warm-the computer to start up (takes up to 30 minutes).
ing up the system (up toHowever, the computer may fail to warm up and the
30 minutes)? is displayed.message ?Cannot warm up the system? will be dis-
played, and the computer will not start. If this happens,
turn off the computer, leave it in an environment with
a temperature of 5 °C {41 °F} or more for about an
hour, and then try turning the power on once more.
? The computer does notLeave it in an environment with a temperature of 5
turn on.°C {41 °F} or more for about an hour, then try turn-
? The computer does noting the power on once more.
resume operation from
standby mode.
(The power indicator
blinks quickly in green.)
15 |
ACEC
