Setting the Wireless Display
Option Menu
By selecting [Option], you can establish the individual settings for the wireless display.
Change the settings of the wireless
connection in the following proce-
Default settingsdure.
General Wireless BatteryOptionVersion1 Select [Setup].
<If the Supervisor Password has been set>
Wireless Connection : SetupEnter the Supervisor Password, then
Power on Password : Changeselect [OK].
Supervisor Password : Change2 Select the profile that has been set
on the following screen, then se-
Touchscreen : Calibrationlect [Enter].
LCD Off Timer : 30 min
LCD Off Mode : Normal resume<Wireless display screen>
Select profile.
Power Off Timer : disable
Profile 1Profile 2
Profile 3Profile 4
100%ExcellentOKCancel
(This screen is a sample.)
Change the Supervisor3 Set by the same procedure as 2 ,
Password.3 , and 4 of ?Setup the Wireless
Display? ( page 9).
Change the password that is input to
run the wireless display.
If there is no input from the
touchscreen or button for a certain in-
terval of time, the display may be
turned off.
Set the interval of time to [30 sec],If there is no input from the
touchscreen or button for a certain in-
[1 min], [2 min], [5 min], [10 min],terval of time, the power may be
[20 min], [30 min] or [disable], then
select [OK].turned off.
Set the interval of time to [30 sec],
Set the resume function to [Normal[1 min], [2 min], [5 min], [10 min],
[20 min], [30 min] or [disable], thenresume] or [Quick resume], then se-
lect [OK].select [OK].
Normal resume:
The wireless connection is dis-
abled during display off.
Quick resume:
Only the screen is turned off dur-
ing display off.
24 |
ACEC
