InstallationSpecifications
Power SupplyDC 12 V (11 V - 16 V), Test Voltage 14.4 V, Negative Ground
qTone Controls (Bass/Treble)Bass; ?12 dB at 62 Hz, Treble; ?12 dB at 16 kHzqRemove the face plate.
Equalizer Center Frequency60, 160, 400, 1 k, 3 k, 6 k, 16 k (Hz)
Variable Range of Equalizer-12 dB to 12 dB (2 dB step)
Current ConsumptionLess than 2.2 A (CD mode, 0.5 W 4-Speaker)
Maximum Power Output 50 W x 4 (at 1 kHz)
Speaker Impedance4 - 8 &
wPre-amp output voltage5 V
General
Subwoofer-output voltage5 V
Pre-amp output impedance 60 &
Subwoofer-output impedance60 &
Dimensions (Main Unit) 178(W) x 50(H) x 155(D) mm {7Ž x 1 15/16Žx 6 1/8Ž}
Weight (Main Unit)1.7 kg {3 lbs. 12 oz}
e
Sampling Frequency8 times oversampling
DA Converter4 DAC System
wRemove the trim plate.
Pick-Up TypeAstigma 3-beam
Light SourceSemiconductor laser
Wavelength790 nm
qFrequency Response20 Hz - 20 kHz (?1 dB)
Signal to Noise Ratio96 dB
CD PlayerTotal Harmonic Distortion0.01 % (1 kHz)
w
Wow and FlutterBelow measurable limits
Channel Separation86 dB
eLock release
q Insert the lock cancel plate until you hear a
FMFM (HD Radio)
click.q
Frequency Range87.9 MHz - 107.9 MHzFrequency Range87.9 MHz - 107.9 MHz
w Pull the main unit.
-5
Usable Sensitivity12.2 dBf. (1.12 ?V, 75&)Usable Sensitivity� 88 dBm (BER<1.0X10)
50 dB quieting Sensitivity15.2 dBf. (1.59 ?V, 75&)Signal to noise ratio79 dB
Frequency Response30 Hz - 15 kHz (?3 dB)Stereo Separation76 dB
Remove the UnitAlternate channel selectivity 75 dBTotal harmonic distortion 0.08 % (1 kHz)
Insert the tabStereo Separation40 dB (at 1 kHz)
To
end in theImage response ratio75 dB
w
outer groove.
IF response ratio100 dB
RadioSignal to noise ratio62 dB
Installation, Specifications
AMAM (HD Radio)
Frequency Range530 kHz - 1 710 kHzFrequency Range530 kHz - 1 710 kHz
-5
Usable Sensitivity25 dB/?V (S/N 20 dB)Usable Sensitivity21 dB/?V (BER<1.0X10)
Signal to noise ratio77 dB
OClick�Stereo Separation74 dB
Total harmonic distortion 0.08 % (1 kHz)
rPull out the unit with both hands.
Above Specifications comply with EIA standards.
Power Output:
18 W RMS x 4 Channels at 4 & and d 1%
THD+N
Signal to Noise Ratio:
78 dBA (reference: 1 W into 4 &)
Cautions:
Notes:
!Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
!Specifications and design are subject to modification without notice due to improvements.
contacts.
!Some figures and illustrations in this manual may be different from your product.
!If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
54CQ-CB8901UCQ-CB8901U55 |
ACEC
