Setting the Fan Speed
Automatic Operation
Y Press 4 to select:-
Y Press the Auto Airflow Direction Button 6.
FAN� Low Fan Speed
Y Cooling / Soft Dry Setting the Horizontal Airflow Direction
FAN� Medium Fan Speed
The louver will automatically swing up and down
FAN� High Fan Speed
to create the feeling of a refreshing breeze.
AUTO
FAN � Automatic Fan Speed
The speed of the indoor fan is adjusted
automatically according to the operation.
The indoor fan stops occasionally during
cooling operation.
Y Adjust it manually
Vertical Airflow Direction
Manual Operation
Y Press and hold the Manual Airflow Direction Use this air conditioner under the following
Selection Button 5 , then release the button atconditions:
the desired airflow direction.
Y Cooling / Soft Dry/
Heating (for Heat-Pump Model only)Cooling Model
The airflow direction can be adjusted as desired
(Unit in !C)
by using the remote control. This is effective
when you want to cool yourself directly, such asDBT: Dry Bulb TempIndoorOutdoor
when coming out of the bath. The louver can beWBT: Wet Bulb Temp
DBTWBTDBTWBT
adjusted within a range between the horizontal
and 25 degrees downward at Cooling and SoftMaximum Temperature32234326
Dry Operation, and between the horizontal and
Y Heating (for Heat-Pump Model only)Minimum Temperature16111611
45 degrees downward at Heating Operation.
When the discharge air temperature is low such
(for Heat-Pump Model only)as at starts of heating operation, the air blows at
horizontal level.
As the temperature rises, the hot air blows in aHeat Pump Model
downwards direction.
(Unit in !C)
DBT: Dry Bulb TempIndoorOutdoor
WBT: Wet Bulb Temp
DBTWBTDBTWBT
Maximum Temperature-Cooling32234326
(Maximum Temperature-Heating)(30)(-)(24)(18)
Horizontal
DownwardMinimum Temperature-Cooling16111611
(Minimum Temperature-Heating)(16)(-)(-5)(-6)
Notes
Y If the unit is not going to be used for an extended
period of time, turn off the main power supply. If it is
left at the ON position, approximately 2.0 W of
electricity will be used even if the indoor unit has been
turned off with the remote control.
Y If operation is stopped, then restart immediately, the
unit will resume operation only after 3 minutes.
6 |
ACEC
