0454E prod doc2.fm Page 5 Friday, June 6, 2003 10:58 AM
OPTIONAL EQUIPMENT CONNECTIONS
Optional Equipment Connections
Note: The remote control must be programmed with suppliedDigital TV - Set-Top Box (DTV-STB) or DVD
codes to operate the optional equipment. Please refer to
Player Connection
page 8 for instructions.
Use this diagram to connect the Panasonic DTV-STB
VCR Connection
(Digital TV-Set-Top Box) to the back of your TV.
VCR?s, video disc players, video game equipment, and
DSS equipment can also be connected to the video inputs.
See the optional equipment manual for more information.
Note: VIDEO 1 input is a dual-purpose input. It is primarily
intended for connection with 480i devices such as a DVD
player using the Y PB PR component video jacks and
H
Audio L & R jacks. However, it can also be connected toS
I
conventional composite video sources such as a VCR,L
using only the Y/Video jack and Audio L & R jacks. TheG
N
on-screen label will display Component or Video 1
E
depending on which source is connected.
Notes:
?There are three video inputs, Y, PB, and P R.
Separate component color inputs provide
luminance and color separation. Use the L (left)
and R (right) audio inputs.
?Select DTV-STB to 480i output mode. TV set can
receive 480i signal only.
Amplifier Connection (TO AUDIO AMP)
Connect to an external audio amplifier input for listening to
a stereo system.
ProcedureNote: TO AUDIO AMP terminals can not be connected directly
?Connect equipment as shown to front or rear Audio/to externalspeakers.
Video input jacks.
?Select the Video mode by pressing TV/VIDEO button.
?Operate optional equipment as instructed in equipment
manual.
Note: Do not connect S-VIDEO and VIDEO signal to INPUT 2
at the same time. If both are connected, signal
interference will result. Use either the S-VIDEO or the
Video signal only.
Audio Adjustments
Cable Box Connection?Select TV SPEAKERS ON from AUDIO menu.
?Set amplifier volume to minimum.
Follow this diagram when connecting your television to a?Adjust television volume to desired level.
Cable Box.?Adjust amplifier volume to match the television.
?Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu.
?Volume, mute, bass, treble and balance are now
controlled through the television.
Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.
Front Control Panel
Use the front panel of the television to use the TV without
remote or to use the Audio/Video input jacks for optional
Procedureequipment.
?Tune the television to channel 3 or 4 depending on theProcedure
RF out setting of the cable box.?Press TV/VIDEO to select VIDEO 3 input mode.
?Using the cable box, tune to the premium cable channel
Note: The front control panel can be used to access menus
you want to view.
and switch video mode when the remote control is not
available.
5 l |
ACEC
