Viewfinder displays
Display itemWhat is displayedStatus causing the display to appear
8 Shutter speed1/cc.cDisplayed when the shutter speed has been set to SYNCHRO SCAN.
1/60 - 1/2000Displayed when a fixed shutter speed has been set.
SUPER VDisplayed when SUPER V (high vertical resolution mode) has been set.
9 LOW LIGHT warningLOW LIGHTDisplayed when the brightness has been reduced.
ENGLISH
display
: Audio level meterIndicates the audio levels of CH1 and CH2 (see page 29).
display
; VTR warningREC WARNING Indicates the occurrence of an error during recording.
display/voltageSLACK E-ccIndicates the occurrence of an error caused by the mechanism. Depending
warning displayon the type of error, the power may be cut off automatically.
<Note>
For details on the codes displayed, refer to Error codes (page 42).
HUMIDIndicates that condensation has formed.
SERVOServo lock is not engaged during recording or playback.
RFThe signal level from the tape has dropped.
TAPE NEAR ENDThe tape is nearing its end (there are about 2 minutes left).
TAPE ENDThe tape has stopped at the tape end.
BATT NEAR ENDThe battery is nearly flat.
BATT ENDThe tape has stopped because the battery is flat.
BACKUP BATT EMPTYIt is time to replace the backup battery.
WIRELESS RFThe strength of the RF signal from the wireless receiver has dropped.
< FULL AUTO/SCENEFULLDisplayed when the FULL AUTO switch has been set to ON.
FILE displayFilename which has been setIndicates the filenames (8 characters) set for the scene files.
= AWB colourAWB+ ccThe adjustment amount is displayed when ON has been selected as the
temperature fine COLOUR TEMP setting (see page 38) and the colour temperature has
adjustment amountbeen adjusted finely. It is not displayed when OFF is selected or only ATW
displayhas been set.
> Zoom displayZ00 - Z99Indicates the zoom amount. However, most 1/2-inch size lenses have no
zoom position return. In such a case, this item is not displayed even if ON
has been selected as the display setting.
? AWB colourc.cKIndicates the colour temperature.
temperature display
@ ATW, AWB channelAchThe WHITE BAL switch has been set to channel A.
displayBchThe WHITE BAL switch has been set to channel B.
PREThe WHITE BAL switch has been set to PRE.
ATWThe full time auto white balance has been set.
A F value displayNCDisplayed when the lens cable has not been connected.
OPENDisplayed when the lens iris has been opened.
F2,0 - F16Indicates the lens iris value.
CLOSEDisplayed when the lens iris has been closed.
<Note>
This item appears when using a lens equipped with a function that displays
the aperture value.
B Gain display0 - 36dBDisplays the current gain value.
C Filter displayFL1 - FL4Displays the filter position.
FLDisplayed when filter has not been set to the proper position.
D Calendar/clock01-Sep-01 00:00:00Day-month-year and hours-minutes-seconds displayed.
display(The 24-hour system is used for the clock display)
E Remaining batterycc.cVThe input voltage is displayed.
charge displayB ++++The number of + squares serves as a rough guideline to indicate how
much battery charge remains. When the battery still has a sufficient charge,
four of these squares are displayed.
cc%The remaining battery charge is displayed as a percentage figure when an
ANTON-D or IDX-D digital battery is used.
18 (E) |
ACEC
