Others
Troubleshooting
1: The power does not turn on.8: The image will not play back.
1-1: Are the batteries inserted? C8-1:heck Is the Memory Card inside?
whether the batteries are inser8-2:ted.There is no image in the Memory
1-2: Is the battery power sufficient?Card.
8-3: The mode dial is not set to playback
2: As the power is turned on, it turns
off immediately.[].
2-1: Is the battery power insufficient to 9: The image is not displayed on the
operate the camera? Replace it with television.
new one.9-1: Is the camera correctly connected
2-2: Are the batteries other than the with the TV? Check it.
recommended ones?9-2: Set the TV to video input mode.
3: The image cannot be recorded.
3-1: Is the Memory Card inside?10: When connecting to a PC, images
3-2: Is the mode dial correctly set? cannot be transferred.
Check it.10-1: Check that the camera is correctly
3-3: There is no memory capacity left on connected to the PC.
the card. Before recording, delete 10-2: Is the camera correctly recognized
some images.by the PC?
11: The clock setting is reset.
4: The image is not displayed on the 11-1: If you do not use the camera for a
LCD monitor.long time, the clock setting may be
4-1: Is the LCD monitor set to OFF? reset. When the message [PLEASE
4-2: Does the economy mode work?SET THE CLOCK] appears, set the
5: The LCD monitor is too bright or clock again.
dark.11-2: When you take a picture before
5:Adjust the brightness of the LCD setting the clock, [0.0.0 0:00] is
monitor.recorded.
6: Flash does not light.
6:The flash mode is set to forced OFF.
Change the flash mode.
7: The display or images on the LCD
monitor are not focused.
7:Set the mode dial to the mode
corresponding to the distance to the
subject.
92 |
ACEC
