M6VP&PC.book 70 &k&& 237677627 1
Troubleshooting guide
PicturePage
TV reception worsens after eThis can occur because the signals are being divided between the unit and other equipment. It can -
connecting the unit.be solved by using a signal booster, available from audio-visual suppliers.
The images from the unit do eMake sure that the TV is connected to the VIDEO OUT terminal, S VIDEO OUT terminal, 14-17
not appear on the TV.COMPONENT VIDEO OUT terminals or HDMI AV OUT terminal on the unit.
Picture is distorted.eMake sure that the TV?s input setting (e.g., VIDEO 1) is correct.-
eThe TV isn?t compatible with progressive signals. Press and hold [+ ] and [Ž DVD] on the main unit at -
the same time for about 5 seconds. The setting will change to interlace.
eWhen connecting with a component video cable to a television that is incompatible with progressive -
video, check if there is also an HDMI cable connected to an amplifier, etc. If so, turn the power off to
the device connected with an HDMI cable, and set the ?HDMI Video Output? to ?Off? in the Setup
menu.
eTo output video from a device connected with an HDMI cable, set ?HDMI Video Output? to ?On? in the -
Setup menu.
ePicture may not be seen when more than 4 devices are connected with HDMI cables. -
Reduce the number of connected devices.
Status messages do not eSelect ?Automatic? in ?Status Messages? in the Setup menu.65
appear.
The blue background does eSelect ?On? in ?Blue Background? in the Setup menu.65
not appear.
The 4:3 aspect ratio picture eUse the TV to change the aspect. If your TV does not have that function, set ?Progressive? in the 40
expands left and right.Video menu to ?Off?.
Screen size is wrong.eIf you connect an HDMI cable, set ?HDMI Output Display Aspect? in the Setup menu to ?Normal?.65
eCheck the settings for ?TV Type?, ?4:3 TV Settings for DVD-Video?, or ?4:3 TV Settings for DVD-65
RAM? in the Setup menu.
There is a lot of after-image eSet ?DNR? in the Video menu to ?Off?.40
when playing video.
When playing DVD-Video eSet ?Progressive? in the Video menu to ?Off?. This problem is caused by the editing method or 40
using progressive output, material used on DVD-Video, but should be corrected if you use interlace output.
one part of the picture eWhen you use the HDMI AV OUT terminal for video output, follow the steps below for setting.
momentarily appears to be (1) Connect this unit to the TV with any cable except the HDMI cable-
doubled up.(2) Set ?HDMI Video Output? in the Setup menu to ?Off?65
There is no apparent change eThe effect cannot be seen with certain types of video.-
in picture quality when
adjusted with the Video menu
in the on-screen menus.
SoundPage
No sound.eCheck the connections and ?Digital Audio Output? settings. Check the input mode on the amplifier if 16, 64
Low volume.you have connected one.
Distorted sound.ePress [AUDIO] to select the audio.27, 33
Cannot hear the desired eSet ?V. Surround Sound? in the Audio menu to ?Off? in the following cases.40
audio type.- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing MTS broadcast titles.
eThis unit cannot playback multi-channel discs that prevent down-mixing unless the unit is connected -
with a HDMI cable to an amplifier supporting CPPM and the HDMI standard version 1.1. Refer to the
disc jacket for more information. [DVD-A]
eThe sound effects will not work when the bitstream signal is output from the HDMI AV OUT terminal -
or the OPTICAL DIGITAL AUDIO OUT terminal.
eAudio may not be heard when more than 4 devices are connected with HDMI cables.-
Reduce the number of connected devices.
eWhen the DIGITAL AUDIO OUT (Optical) terminal is used for audio output and the unit is connected 65
to the television with a HDMI cable, set "HDMI Audio Output" to ?Off? in the setup menu.
eIf the sound is distorted when the unit is connected to an amplifier with the HDMI cable, adjust the 65
settings in ?HDMI Connection Speakers Setting? in the Setup menu to match the connection.
eDepending on the connected equipment, the sound may be distorted if this unit is connected with a -
HDMI cable.
Cannot switch audio.eYou cannot change the audio type when a DVD-R, a DVD-R DL, a DVD-RW (DVD-Video format), a -
+R, a +R DL or a +RW is in the disc tray.
eYou cannot change the audio type when playing a DVD-R, a DVD-R DL, a DVD-RW (DVD-Video 64
format), a +R, a +R DL or a +RW. (You can select ?Main? or ?Secondary Audio Program (SAP)? in
?Multi-channel TV sound (MTS)? in the Setup menu before recording.)
eYou have used a digital connection. Set ?Dolby Digital? to ?PCM? or connect using audio cables 16, 64
(analog connection).
eThere are discs whose audio cannot be changed because of how the disc was created.-
70
RQTV0141 |
ACEC
