CONNECTING TO AUDIOVISUAL EQUIPMENTSONIC VIBRATION: TURNING ON AND OFF
ENJOY MUSIC OR A VIDEO WHILE YOU RELAX
1. To use the sonic vibration, make sure the OOn/Off� switch at the top
of the controller is on. Make sure that the operating lamp comes on.
The Household Air Massager uses a built-in sonic transducer to create sonic vibrations. By2. If you do not have any audio input, but still want to experience
connecting the cables supplied with the Household Air Massager to audiovisual equipment, youvibration, select the OVib.� switch. This will go through an
can feel sound as vibrations synchronized with the bass of an audio frequency.approximately 15 minute program of vibrations in your back area.
You can change the intensity of the vibration by holding down the
up/down arrows on the intensity adjustment buttons.
3. If you are using an audio input (see instructions on page 8 for
In the case of an RCA-type audio
hooking it up), you can experience vibrations that are
output
synchronized to the lower frequencies of the audio. To experience
Use the 20-ft cable and connect the
this, hit the OSonic Audio� switch. Again, you can adjust the intensity
minijack to the appliance and the RCA
of the synchronized vibrations with the intensity up/down arrows.
red and white plugs to the audio output
Sonic vibration intensity is adjustable to different 9 levels. Pressing
of a television, etc.
an adjustment button twice will move the indicator light up or down
Television or
other audiovisualone position.
equipment
Automatic timer for sonic vibration
In the case of a minijack-type audio
OSonic Audio� is designed to switch off automatically after 75 minutes of continuous use, if no
output
intensity adjustment buttons are pushed during that time. This will be extended by 75 minutes,
Connect the minijack on one end of theeven after turned off by the timer, by touching the OSonic Audio� switch. OVib.� is designed to
5-ft cable to the appliance and the other
shut off after approximately 15 minutes, if no intensity adjustment buttons are pushed.
minijack to the audio output of a CD
Even if automatically turned off, you can easily return to the previous vibration intensity by
player, etc.Personal
CD playerpressing the OSonic Audio� or OVib.� switch.
If the Air Massager is not operated for approximately 15 minutes after OSonic Audio� or OVib.�
(not included)
have been switched off by the timer, the OOn/Off� switch will also be automatically switched off.
When the only available audio output
is a headphone jack
To listen with headphones: Connect theMAINTENANCE
headphone double adaptor jack plug to
Y When cleaning the massager, always unplug first.
the headphone jack of a television etc.,
Y When the covering material needs cleaning, gently apply a little liquid soap, wipe with a damp
then use a minijack on one end of the
cloth and allow to dry naturally. When plastic parts need cleaning, wipe with a soft cloth dipped
5-ft cable to connect to the appliance
and the other minijack to connect to thein a mixture of lukewarm water and liquid soap.
headphone double adaptor jack plug.Y Do not use paint thinner, benzene or other solvent-based cleaners, as chemical substancesTelevision,
computer ormay cause discoloration or damage.
other audiovisual
(not included)
equipment
NOTE:
1. Vibratory responsiveness may be inhibited at times due to the signal content of the audiovisual
source.
2. Output terminals from audiovisual devices that are monaural cannot be used.
3. If supplied cable length is insufficient, please purchase commercially available stereo cable.
89 |
ACEC
