Parts and their functions (continued)
Accessory mounting section
12 :
1
5
6
3
4
6
8
7;9
1Hooks for attaching shoulder strap9Shoulder pad
Attach the ends of the accessory shoulder strap toThis pad can be adjusted to facilitate operation
these hooks.when the unit is operated on the users shoulder.
The pad position can be moved forward or
2Light shoebackward when the two securing screws are
Use this to attach the video light, etc.loosened.
3Lens mount (Bayonet type):Mounting hook for tape measure
Use this to attach the lens.The tape measure used to measure the subject
distance is attached here.
4Lever for securing lens <Note>
Insert the lens into the lens mount 3, and turn theThis hook is not to be used for the shoulder strap.
lens mount ring using this lever to secure the lens.
;Focus mark
5Lens mount capThis indicates the focus position of the CCD unit.
To remove the cap, push the lever for securing the
lens 4 up.
Keep the cap in place while the lens is not
attached.
6Lens cable/microphone cable clamp
This clamp is for anchoring the lens cable or
microphone cable.
7Tripod mount
Mount the tripod attachment (SHAN-TM700),
available as an optional accessory, when the unit is
to be anchored to the tripod.
8LENS terminal (12-pin)
The connecting cable of the lens is connected here.
For details concerning the lenses that can be used,
consult your dealer.
11 |
ACEC
