Connections
Making a call5.After control of the pan-tilt head is completed, press the
STOP key.
Make a call from the AW-DU600 of the transmitting
OHang Up� appears on the LCD display and the
system.telephone line is cut.
1.Turn on the power to all units.Once the line is cut, OPress Start� appears on the LCD
panel.
2.Use the number keys on this adapter to enter theWhen ON has been selected for the OMenu-7 Pw-Off�
desired number.setting, the power to the pan-tilt head will turn off at the
The telephone number entered appears on the topsame time as the telephone line is cut. When OFF has
section of the LCD panel.been selected for the OMenu-7 Pw-Off� setting, the
power to the pan-tilt head will remain on when the
0123456789!Telephone number enteredtelephone line is cut.
<Note>
1:Press Star t
If the POWER switch or OPERATE switch on the
If the wrong number is entered by mistake, press thecontrol panel is set to OFF before the telephone line is
DELETE key (# i0 ) to delete 1 digit at a time,cut, the power to the pan-tilt head will turn off regardless
starting from the number entered last. Press the CLEARof the OMenu-7 Pw-Off� setting.
key (# iSTART ) to delete the whole number at
once.
<Note>
3.After entering the telephone number, press theWhile the telephone line is being connected, none of the
START key.operating keys on the adapters will function except for
When the connection is initiated, OCalling� appears onthe STOP key on the transmitting side.
the LCD panel.
When the connection is established, OConnect� appears
on the LCD panel and control of the pan-tilt head
system from the control panel is possible.
<Note>
The message appearing on the LCD panel may differ,
depending on the modem used.
4.Control the pan-tilt head system from the control
panel.
When an AW-RP605 is being used as the control panel,
set the OPERATE switch to ON to control the pan-tilt
head system.
<Note>
OWhen an AW-RP505 or AW-RP605 is being used as
the control panel, it is possible to switch the receiving
pan-tilt head system using the CONTROL button on
the control panel.
OIf the OPERATE switch on the AJ-RP605 is set to ON
before the telephone line is connected, ONO
CONNECT� is displayed on the LCD panel.
12 |
ACEC
