Connecting peripheral equipment
Video recorderCarry out the connections shown opposite, using a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket,the only
connection possible is via the aerial cable.You will therefore need to
tune in your video recorder's test signal and assign it programme
number 0 (refer to manual store,p.5).
To reproduce the video recorder picture,press 0.
Video recorder with decoder
VCR
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Other equipment
Satellite receiver, decoder, games, etc.
Make the connections as shown opposite.
Amplifier
To connect a Hi-fi unit, use an audio connecting cable and
connect :
- The �L� and�R� outputs of the TV set to an �AUDIO IN� �L�
and �R� of the Hi-fi unit.
- The �PCM� output of the TV set to a �DIG IN� input of the
amplifier (amplifier with digital coaxial input).
Side connections
Make the connections as shown opposite.
Headphones
When headphones are connected, the sound on the TV set
will be cut.The @ # keys are used to adjust the volume
level.
The headphone impedance must be between 32 and 600 Ohms.
456
798
To select connected equipment
O0�
Press the n key to select EXT (and AV)for the side connections.
Most equipment (decoder,video recorder) carries out the switching itself.
13 |
ACEC
