The keys on the remote control
Select EXT socketsStandby
Press several times to select EXTTo set the TV to standby mode.
sockets (see p.7).The red indicator lights up.To
switch the set back on,press P
, P or to .
Numerical Keys
For direct access to programmes
For a 2-digit programme number,Screen Information
the second digit must be enteredHold down for 5 seconds to
before the dash disappears.permanently display the
To view a programme which has beenprogramme number. Press quickly
locked,you must enter the confidentialto display or remove the
code number (see p.6).programme number and the time.
Smart sound controls
To access a series of settings:Smart picture controls
CINEMA, MUSIC,SPEECHandTo access a series of settings:
return to PERSONAL.RICH(when the room is very
light),NATURAL (optimum
conditions),SOFT (when the
room is very dark) and return toMenu
PERSONAL.To call up or exit from the menus.
Use and to adjust.
The menus disappear automatically
after 30 seconds if no furtherTimer
command is given.To select an automatic standby
period (from 0 to 240 minutes).
Volume
To adjust the sound level.
Select Programme
MuteBrings up the previous or
To disable or enable the sound.following programme.
The keys on the TV set
The television set has 4 keys which are located on the front or the top
of the set depending on the model.
The VOLUME - + (-a+) keys are used to adjust the sound level.
The PROGRAM - + (- P +) keys are used to select the required
programmes.
To access the menus, hold down the VOLUME - and VOLUME + keys
simultaneously.Then use the PROGRAM - + keys to select an adjustment
and the VOLUME - + keys to make the adjustment.
To exit from the menu, hold down the VOLUME - and VOLUME + keys
for a few seconds.
Note:when the LOCK function is activated,these keys are unavailable (see
page 6).
2 |