SETTINGTHE REMOTE CONTROLTO OPERATE ACCESSORY DEVICES
he Auto Search Method of programming the
Tremote control can take several minutes to
complete. So before starting, it is recommended
that you seat yourself in a comfortable positionSatellite Receiver
at least six feet from the accessory device. You
will have to hold the remote so that it is pointed
at the front of the device for the entire time the
07
search is taking place.
08
Cable Converter
Turn the accessory device ON using the09
06
devices power button.
107
1Press the desired MODE button that
corresponds to the type of device you
20906
wish to operate. (CBL, VCR, AMP, HD,
07
SAT, DVD, or CD) A green light will
08
indicate the mode labeled on the top of
VCR
the button, while a red light will indicate09
the mode labeled on the bottom of the
button. If needed, hold the button down
4
and the light will toggle between the
green and red settings.
2
Press and hold the NUMBER 1 and 3
buttons at the same time until the back-
3
light and selected mode buttons light up.
Then, release both buttons.4
Press and release the red POWER but-
ton on the remote control. The backlight5
4
buttons will turn off.
The remote will start the Auto Search of all
available codes, sending a command to channel
up. The backlight will blink after each code is
tried. (For devices such as DVD or CD players,
insert a disc and press PLAY on the device. The
remote control will send a command to switch to
the next track. Switch AVreceivers to the tuner
function.)
IMPORTANT: Watch the channel indicator of
33
your accessory device closely. Once the right
code is found the channels on your device will
start to scan up.
ACITVE
SOUND CONTROL PICTURE
Press and release the red POWER but-
ton on the remote control as soon as the
5
channels start to change. The backlight
ZOOM
buttons and selected mode button will
blink twice to indicate the Auto Search
code setup is complete.
Note: if any other buttons are pressed during the
procedure, the Auto Search will end.
Remember, Auto Search can take several min-
utes to complete. Please be patient.
55 |
ACEC
