Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.
Video recorderVideo recorder (only)
Carry out the connections featured opposite.To record digital
programmes from your TV,the VCR must be connected to EXT2.
If your video recorder does not have a euroconnector socket,the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
programme number 0 (refer to manual store,p.14).
EXT 2
To reproduce the video recorder picture,press 0.In this case it
will not be possible to record digital channels.
VCR
Video recorder with decoder
Connect the decoder to the second euroconnector socket
of the video recorder.You will then be able to record
scrambled transmissions.
Other equipmentSatellite receiver, decoder, DVD, games, etc.
Carry out the connections featured opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to
EXT1, and the equipment which produces the S-VHS
signals (S-VHS and Hi-8 video recorders, certain DVD
drives) to EXT2 and all other equipment to either EXT1
EXT 1
or EXT2.
Side connectionsCarry out the connections featured opposite.
Using the n key,select EXT3 for a VHS or 8mm
S-VHScamcorder and S-VHS3 for an S-VHS or Hi-8 camcorder.
VideoFor a mono set,connect the sound signal to the AUDIO L
R Audio L
(or AUDIO R) input.The sound automatically comes out of the
*S-VHS, Hi-8left and right speakers of the TV .
S-VHSHeadphones
VideoThe @# keys allow you to adjust the volume on
R Audio LVHS, 8 mmthe headphones and on the set. Press m if you want to cut
off the sound on the set.
*
The headphones must have an impedance of between 32 and
600 ohms.
.To select connected equipment
MODEEXIT/OPTIONS
VCRZPress the n key to select EXT1, EXT2, S-VHS2 (S-VHS signals from
DVD+
?cEAthe EXT2 socket) and EXT3 or S-VHS3 for connections on the side
&�
u-panel.
Most equipment (video recorder,etc) carries out the switching automatically.
19 |
ACEC
