ENGLISH131
Tanning
1 Put on the protective goggles provided.
2 Switch the tanning lamps on by pressing the green I button.
� The display shows the remaining tanning time.
� During the tanning session, the dot next to the time indication blinks.
� If you want to switch the appliance off during the tanning session, press the red O button.
BA few seconds after the appliance has been switched off,the cooling fans go on automatically to cool down the appliance for 3 minutes (if the
standard setting has not been changed).Symbol and the remaining cooling time (180-0 seconds) are shown on the display.
� You can adjust the intensity of the facial tanner during the tanning session. Use the ! and " buttons to select a and then set the
required intensity.The new setting becomes active immediately.
BIf you have not set the fan power within approx.5 seconds,the remaining tanning time will be shown on the display again.
BIf you want to set the facial tanner from O (off position) to 1 or 2 while the lamps have not yet cooled down sufficiently,the O symbol will blink on
the display.
� You can adjust the fan power of the body cooler during the tanning session. Use the ! and " buttons to select ` and then set the
required power.The new setting becomes active immediately.
BIf you have not set the fan power within approx.5 seconds,the remaining tanning time will be shown on the display again.
� During the last 5 seconds of the tanning session,you will hear a beeping sound and the appliance will switch off automatically after these
5 seconds.
A few seconds after the appliance has been switched off, the cooling fans go on automatically to cool down the appliance for 3 minutes (if the
standard setting has not been changed). Symbol and the remaining cooling time (180-0 seconds) are shown on the display. |
ACEC
