DVD Player or other accessory digital source devices
Devices with Component Video Output Connectors (YPbPr)
AV2AV1
RPr/R Y/GVS-VIDEORPrY&Connect the three separate component video cables 1to the device
having component video outputs (YPbPr), such as DVD-players, laser-disc
players, videogame players, satellite receivers or other equipment, and to
the Y,Pb and Pr jacks of AV1 or AV2 on the TV.
LPb/B CVBSHS-VIDEOLPbéConnect the audio cable to deviceOs AUDIO Land R2jacks and to the
Lan Raudio jacks of AV1or AV2.
Devices with RGB output
&Connect the device with RGB output with separate Horizontal and Vertical
132sync to the Pr/RPb/B Y/G input 1 jacks and to the H and V jacks of
AV23.
Connect the audio cables to the Land R AUDIOjacks of AV2.
Devices with an S-Video connector
&Connect an S-Video cable to the AV1or AV2 S-VIDEOinput.
Note:When using the S-VIDEOconnector do not connect any device to the AV2
CVBSor AV1 Yinput.
DVD / Cable BoxéConnect the audio cables to the deviceOs AUDIO Land Rjacks and to the
L and R audio AV1or AV2jacks on the TV.
Notes
- The labels for the component video sockets may differ depending on the DVD
player or the device connected.Although the abbreviations may vary,the letters
B and R stand for the blue and red component signals,respectively,and Y
indicates the luminance signal.Refer to the DVD playerOs or devices instructions
for use for definitions and connection details.
- This television is designed to accept high definition signal standards 480p,720p,
1080i and 1152i as specified by the Electronic Industries Association standard
EIA770.3.
Digital devices from different manufacturers have the possibility of differing
output standards which may cause difficulties for the television to properly
display.
Warning:in case you notice scrolling images,wrong colours or no colour,no
picture,or even combinations of these on your screen,check if the connections
are done in the correct way or move your digital device further away from your
TV.
Multi channel Surround receiver
&Connect the audio cable to the multi channel Surround receiver and to
AUDIO RECEIVER Land Rnext to the CENTRE connector of your TV
AUDIO1.
CENTRE RNote:turn off the TV and your surround receiver before connecting them.Set the
Surround receiverOs volume to minimum.
éIf you want the loudspeakers of your TV to act as centre speaker,also
1connect an audiocable to the multi channel Surround receiver and to theSUBW.L
CENTRE connector of your TV 2.
ŤSelect centre Input Onin the Source menu.See p.9.
The loudspeakers of the TV will now only produce centre sound, the
loudspeakers connected to the audio receiver will produce Surround
2Sound.The volume has to be controlled via the multi channel Surround
receiver.
Note:No sound will be heard when a TV channel or external source is blocked via
the Channel Lock menu (see p.13).
18 |