PHILIPS 64P9271 Instruction Manual

SOUND MENU CONTROLS (CONTINUED )
SURROUND SOUNDSMART
REAR SURROUND SOUND
y adding optional externalSPEAKER TERMINALSHELP
1
Bspeakers to the TV's soundRemember,
REAR SURROUND SPEAKERS
system, you can create the feelingYSurround Sound
of reflected sound that surroundsPBwill not work with
BACK OF TV
you at a movie theater or concertPRonly one speaker
+R��L+
hall.connected; or with
BEGINSUBWOOFER
monaural audio
REAR SURROUND SPEAKERSYPB
+RSUBWOOFER��L+PRS-VIDEO
1Connect both externalSUBWOOFER OUTPUTFIXEDVARVIDEO OUTPIPVIDEOLmaterial (unless
AUDIO OUTRLAUDIORAUX 1INPUTSAUX 2AUX 3
Use the Subwoofer Output (RCAspeakersto the speaker wireANT75 VA/CABLE UHF/VHFANT75 V B/CABLE UHF/VHFPIPVariable Audio
plug connector) to send the
terminals on the TV.Surround control is
subwoofer audio channel signal (at
line level) to an optional externalturned ON - see
Recommended speakers: 8ohm, 15
powered Subwoofer speaker. The
section below).
watt minimum. Be sure the (+) andSubwoofer audio signal is for the
(-) speaker wires are connected toplayback of only the lowest
frequency notes (under 100 Hz).
the correct R(ight) and L(eft)
speaker terminals on the TV.
2Place the speakers so the
+-+-TV
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
3Turn TV ONand place the
SUBWOOFER
STEREO control to the "STEREO
2
IF AVAILABLE" (U) position.
REAR SURROUND SOUND SPEAKERS
After setup whenever a stereoNote:The rear Surround Sound speakers will not
signal is received the audio will bebe heard at the same volume level as the front TV
speakers. It is intended for the rear speakers to
heard in Surround Sound.REAR SPEAKER
give a background noise effect which requires aREAR SPEAKER
lower volume level than the TV's front speakers.
STOP
PRIMARY VIEWING AREA
VARIABLE AUDIO OUTPUT
he TV's Variable Audio Output
Tjacks can also be used for1
BACK OF TV
Surround Sound. Once they areSOUND MENUFIXEDVIDEO
VIDEO OUT
VARIABLE AUDIO OUTPUT
connected to an external hi-fiVARAUDIOL
PIPIR BLASTERR
system its speakers can be used forAUDIO OUTRLAUX 1AUX 2AUX 3
INPUTS
the playback of Surround Sound. ANT75 V A/CABLE UHF/VHFANTEXITMORE...75 V B/CABLE UHF/VHFPIP
VARIABLE AUDIO OUTPUT3 OF 3
BEGIN
STEREO
VARIABLE AUDIO
1Connect the R(ight) and L(eft)SURROUNDOUTPUT JACKS
AVPOWER
VARIABLE AUDIO OUT jacksEXITHELP
GUIDEINFO
on the TV to the R and L Audio
Input jacks on your amplifier orTVVCRACCAUDIO
SWAPPIP CHSOURCEFREEZEINPUT JACKS
sound system.DNUPRL2
SLEEPAUTO
AUX/TV INPUT
2Turn TV ONand place theSTATUS/EXITMENU/SELECT
PHONO INPUT
VARIABLE AUDIO OUTPUT on
VOLCH
screen control to the SURROUNDMUTE2
(U) position. (Sound Menu 3 of 3).
123
456
Note:This will change the
789
Left/Right channel audio line level
100+0SURF
signal at the Audio Output jacks toPOSITIONPIP
the same signal found at the TV'sAUDIO SYSTEM SPEAKERS USED AS REAR
Surround Sound Speaker terminals.SURROUND SOUND SPEAKERS
STOP
31