7610_16_17.qxd 6/6/05 12:39 PM Page 16 (Zwart plate)
16ENGLISH
Once A Month: Razor Heads
� Do not mix up the cutters and combs as the
shaving persormance may be adversely
affected for several weeks before optimal
shaving performance is restored.
1Turn razor OFF, remove the charging plug
from the outlet and cord from the razor.
C2Press the razor head release button (1),
open and lift off the razor head assembly (2).
C3Turn the center wheel counterclockwise
(1) and remove the retaining frame (2).
4Remove and clean one set of cutters and
combs at a time.
C5Separate the cutter from the comb and
rinse clean under hot water.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C6Replace the set back into the Head
Assembly so that the �wingsO on the comb
fit within the brackets located towards the
center of the assembly. |
ACEC
